background image

- 3 -

Precautions

Unit

To reduce the risk of fire, electric shock or product damage,

Do not expose this unit to rain, moisture, dripping or splashing.

Do not place objects filled with liquids, such as vases, on this 

unit.

Use only the recommended accessories.

Do not remove covers.

Do not repair this unit by yourself. Refer servicing to qualified 

service personnel.

AC power supply cord

The power plug is the disconnecting device.

Install this unit so that the power plug can be unplugged from the 

socket outlet immediately.

Unit

This unit utilizes a laser. Use of controls or adjustments or 

performance of procedures other than those specified herein 

may result in hazardous radiation exposure.

Do not place sources of naked flames, such as lighted candles, 

on this unit.

Some portions of this unit may become hot during use. When 

moving or cleaning this unit, disconnect the AC power supply 

cord and wait for 3 minutes or longer.

Placement

To reduce the risk of fire, electric shock or product damage,

Do not install or place this unit in a bookcase, built-in cabinet or 

in another confined space. Ensure this unit is well ventilated.

Do not obstruct this unit’s ventilation openings with newspapers, 

tablecloths, curtains, and similar items.

Do not place the unit on amplifiers/receivers or equipment that 

may become hot. The heat can damage the unit.

Batteries

Mishandling of batteries can cause electrolyte leakage and may 

cause a fire.

Danger of explosion if battery is incorrectly replaced. Replace 

only with the type recommended by the manufacturer.

When disposing of the batteries, please contact your local 

authorities or dealer and ask for the correct method of disposal.

Do not mix old and new batteries or different types at the same 

time.

Do not heat or expose to flame.

Do not leave the battery(ies) in a car exposed to direct sunlight 

for a long period of time with doors and windows closed.

Do not take apart or short circuit.

Do not recharge alkaline or manganese batteries.

Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for 

a long period of time. Store in a cool, dark place.

This unit adopts the following technology for copyright protection.
Cinavia Notice

This product uses Cinavia technology to limit the use of 

unauthorized copies of some commercially-produced film and 

videos and their soundtracks. When a prohibited use of an 

unauthorized copy is detected, a message will be displayed and 

playback or copying will be interrupted.

More information about Cinavia technology is provided at the 

Cinavia Online Consumer Information Center at 

http://www.cinavia.com. To request additional information about 

Cinavia by mail, send a postcard with your mailing address to: 

Cinavia Consumer Information Center, P.O. Box 86851, San 

Diego, CA, 92138, USA.

The operation history may be recorded in the memory of this 

unit.

WARNING

CAUTION

Restriction on use of 
unauthorized copied content

[UB400]

Wireless LAN connection

The following limits are in place regarding the usage of this unit. 

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage 

which may arise due to a failure to obey these limits, or to any 

condition of use or disuse of this unit.

Data transmitted and received over radio waves may be 

intercepted and monitored.

This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and 

follow the following points:

– Do not expose this unit to high temperatures or direct 

sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you 

discard this unit either by disposal or transfer, then follow the 

procedure to return all the settings to the factory presets to delete 

the user settings. (

>

35, “To return all settings to the factory 

preset.”)

Summary of Contents for DMP-UB400















































Reviews: