- 32 -
Messages on the screen
Cannot play.
¾
You inserted an incompatible disc.
Cannot play on this unit.
¾
You tried to play a non-compatible image.
¾
Re-insert the media.
No disc inserted.
¾
The disc may be upside down.
$
This operation is not available.
¾
Some operations are unsupported by the
unit. (For example, reverse slow motion, etc.)
IP address is not set.
¾
The “IP Address” in “IP Address / DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address
acquisition if necessary.)
The wireless access point currently has a low
network security setting. It is recommended
to change to a higher setting.
¾
Set a stronger network security level referring
to the wireless router operating instructions.
Messages on the unit’s display
NET
¾
While connecting to a network.
No PLAY
¾
There is a viewing restriction on a BD-Video
or DVD-Video. (
¾
The media is dirty or badly scratched. The
unit cannot play.
REMOVE
¾
The USB device is drawing too much power.
Remove the USB device.
SET
(“
” stands for a number.)
¾
The remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
U59
¾
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
H
or F
(“
” stands for a number.)
¾
There is something unusual.
¾
Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
1
Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2
Press [
Í
/I] to turn the unit on.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
UPDATE
¾
The system is being restarted during the
firmware update. Please do not turn off the
unit.
UPD
/
(“
” stands for a number.)
¾
The firmware is being updated.
Please do not turn off the unit.
FIN
¾
The firmware update is complete.
