C
o
nn
e
c
ti
o
ns
&
S
e
tt
in
gs
15
VQT3V22
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
(
>
32, “Remote Control Code”)
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
To update the firmware
Press [HOME]
>
select “Setup”
>
select
“Player Settings”
>
select “System”
>
select
“Firmware Update”
>
select “Update Now”
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FINISH” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
≥
If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.
(
>
32, “Firmware Version Information”)
≥
Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥
If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (
>
32)
Smart eco-sensor
This mode will decrease the power consumption
when the unit is in stand-by mode and the sensor
does not detect people close by.
Preparation
Set “Quick Start” to “On (Smart eco-sensor)” (
>
32).
Sensor detection range image and operation
of the unit
A
Sensor detection range (at
i
20
e
C (
i
68
e
F)):
Within a distance of approx. 5 m (16.4 ft)
and an angle of 20
e
up and down and 30
e
left and right from the unit
≥
The power consumption is minimal when
people are out of the detection range for more
than 30 minutes.
≥
The following will occur when there is a
movement within the detection range, such as
someone walking into the room where this
unit is placed.
– Speed of startup from power off will
increase.
– Idle power consumption will increase.
(About the power consumption
>
39)
B
The slot-in LED will light up when there is a
movement in immediate proximity of this
unit, such as inserting a disc.
≥
This function does not work under the following
conditions.
– For about 1 minute after connecting the AC power
supply cord.
– The unit is placed in a glass-fronted cabinet.
≥
The detection sensitivity may be reduced under the
following conditions.
– The room temperature is close to the body temperature.
– The unit is exposed to direct sunlight or close to heating
appliances.
– People are approaching straight to the unit.
– Other than listed above, temperature change or some
interference, etc., can affect the detection sensitivity.
Reprogramming the
remote control
Firmware updates
New firmware is available.
Please update firmware in Setup.
The firmware was updated.
Current Version
:
x.xx
RETURN
OK
DMP-BDT320_VQT3V22_eng.book 15 ページ ２０１２年１月１１日 水曜日 午後８時４９分