background image

- 22 -

Playback

“HDMI CEC”

This unit supports “HDMI CEC” (Consumer 
Electronics Control) function.

See the operating instructions for connected 
equipment for operational details.

Preparation

1

Set “HDMI CEC” to “On” (

>

29). 

(The default setting is “On”.)

2

Set the “HDMI CEC” operations on the 
connected equipment (e.g., TV).

3

Turn on all “HDMI CEC” compatible 
equipment and select this unit’s input channel 
on the connected TV so that the “HDMI CEC” 
function works properly.

Repeat this procedure when the 
connections or settings are changed.

When the unit starts playback, the TV will 
automatically switch the input channel and the 
screen of the unit will be displayed.
Additionally when the TV is off, the TV will 
automatically turn on.

All connected equipment compatible with “HDMI 
CEC”, including this unit, automatically turns off 
when you switch the TV off.

By using the TV remote control, you can perform 
the same operations as you use the remote 
control of this unit. (

>

10)

 

This unit supports the “HDMI CEC” (Consumer Electronics 

Control) function. However, operation cannot be 

guaranteed on all HDMI CEC devices.

USB Sharing

[For_the_Middle_East_and_South_East_Asia]

This function allows you to copy content 
between the following media.

Preparation

Insert the media. (

>

15)

1

Press [USB SHARING].

2

Select the copy source and press [OK].

3

Select the folder or file to be copied and 
press the red button on the remote 
control.

Press the red button on the remote control 

again to cancel.

4

Press [OK].

5

Select the copy destination and press 
[OK].

6

Select “Yes” on the confirmation screen 
and press [OK].

When the destination contains a folder or 

file with the same name, you can change 

the option for resolving the conflict by 

pressing [OPTION].

 

You cannot set the media formatted to NTFS as a copy 

destination.

Copying of files in all formats is not guaranteed.

Videos on discs and copyrighted content on discs cannot 

be copied.

Panasonic does not accept any responsibility for damages 

directly or indirectly due to any type of problems that result 

in loss of copying content (data), and does not guarantee 

any content if copying does not work properly.

The recording and playback of content on this or any other 

device may require permission from the owner of the 

copyright or other such rights in that content. Panasonic 

has no authority to and does not grant you that permission 

and explicitly disclaims any right, ability or intention to 

obtain such permission on your behalf. It is your 

responsibility to ensure that your use of this or any other 

device complies with applicable copyright legislation in 

your country. Please refer to that legislation for more 

information on the relevant laws and regulations involved 

or contact the owner of the rights in the content you wish to 

record or playback.

You can use this function by connecting the 
equipment that supports “HDMI CEC”.

Automatic input switching

Power on link

Power off link

Easy control only with TV 

remote control

Disc

USB

Summary of Contents for DMP-BDT270








































Reviews: