Panasonic DMP-BDT235, Operating Instructions Manual

Page: 39 / 48

- 39 -
Reference
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio
Output” settings. (
>
11, 31)
Disc cannot be played.
¾ The disc is dirty. ( > 5)
¾ The disc is not finalized. ( > 7)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ Confirm that this unit is connected to the
broadband Internet. (
> 13)
¾ Confirm the “BD-Live Internet Access”
settings. (
> 34)
¾ Confirm a USB device is connected to the
USB port. (
> 17)
Audio
Cannot switch audio.
¾ The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (
> 31)
¾
[BDT335]
When connecting this unit to a TV
via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to
“V.OFF(Video Off)”. (
> 11)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (
> 31)
There is no sound coming out from the TV.
[BDT335]
¾ Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (
> 31) is set to “V.OFF(Video Off)”. In
such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
Playback