Panasonic DMCTS10, Basic Operating Instructions Manual

Page: 13 / 44

12
VQT2X42 (ENG) (ENG) VQT2X42
13
Camera care and the waterproof
performance
(Continued)
Cleaning the rubber seals
When a foreign object (such as hair, sand, dust or liquid) adheres to the
rubber seal or rubber seal contact area, water may enter within a few
seconds and cause a malfunction.
•When cleaning, make sure that no foreign objects get inside the
camera.
•Be especially careful when removing very small or wet sand particles.
Make sure that there are no foreign objects adhered to the inner
side of the card/battery door or terminal cover ( rubber seal
or rubber seal contact area)
: Terminal cover
: Rubber seal
: Rubber seal
contact area
: Card/
Battery door
: Hair or lint
: Sand or dust
: Crack or
deformation
: Liquid
• When the rubber seal attached to the inner side of the card/
battery door or terminal cover is cracked or deformed, contact
a Panasonic Service Center.
Remove adhered foreign objects with the supplied brush
: Brush (supplied)
Long brush Short brush
Use to remove
substances such
as fine or dry
sand.
Use to remove
large foreign
objects, and
substances such
as wet sand.
: Card/
Battery door
: Terminal cover
●
Handling the brush
•Before using the brush, make sure that no foreign objects are
adhered to it.
•After using the brush, clean it by removing any adhered foreign
objects.