Panasonic DMC-SZ9EB, Operating Instructions Manual, Page: 139 / 223

- 139 -
Wi-Fi
Search for available wireless access points.
• Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
• When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless
access point you are using.
1
Press
3
/
4
to select the wireless access point you are
connecting to, and press [MENU/SET].
• Pressing [DISP.] will search for a wireless access point again.
• If no wireless access point is found, refer to “When connecting with
[Manual Input]
” on
P139 .
2
(If network authentication is encrypted)
Enter the encryption key.
• For details on how to enter characters, refer to “Entering Text” section
on P80 .
∫
When connecting with [Manual Input]
1
On the screen displayed in step
1
of “If you are not sure about the WPS
compatibility (connecting by [Manual Connection])”, select [Manual Input] by
pressing
3
/
4
, then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
• For details on how to enter characters, refer to “Entering Text” section on
P80 .
3
Press
3
/
4
to select the network authentication type, and press [MENU/SET].
• For information on network authentication, see the manual of the wireless access point.
4
Press
3
/
4
to select the encryption type, and press [MENU/SET].
• The type of settings that can be changed may vary depending on the details of network
authentication settings.
5
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
• Check the wireless access points instruction manual and settings when a saving wireless access
point.
• If no connection can be established, the wireless access point’s radio waves may be too weak. Refer
to
“Message Display”
(P196) and
“Troubleshooting”
(P200) for details.
• Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
If you are not sure about the WPS compatibility (connecting by [Manual Connection])
Network authentication type Encryption types that can be set
[WPA2-PSK]/[WPA-PSK] [TKIP]/[AES]
[Common Key] [WEP]
[Open] [No Encryption]/[WEP]