Panasonic DMC-SZ9EB, Operating Instructions Manual, Page: 157 / 223

- 157 -
Wi-Fi
1
Press [Wi-Fi].
2
Press 3 / 4 / 2 / 1 to select [New Connection], and then
press [MENU/SET].
• When connecting with the setting you used before, you can select the connection destination
from [History Connection] (P135) or [Favorite Connection] (P136) .
3
Press 3 / 4 to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4
Press 3 / 4 to select [AV device], and then press [MENU/SET].
5
Press 3 / 4 to select [Home] or [External], and then press [MENU/SET].
6
Press 3 / 4 to select connection method, and then press [MENU/SET].
7
Press 3 / 4 to select a device you want to connect, and then press [MENU/SET].
• When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.]. (P145)
8
Press 3 / 4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
• To change the setting or disconnect, press [Wi-Fi].
(P142)
9
Select and send the images. (P153)
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
• Read the operating instructions of your device for details.
When sending images to [External], the following are required:
• Registration to “LUMIX CLUB”
(P163)
• Address number and access number acquired by the destination External AV device.
(P167)
[Via Network]
When you want to connect to an AV device via a wireless access point.
(P138)
[Direct]
• This can be
selected only
when
[Home] is
selected.
When you want to directly connect an AV device to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection].
(P140)