- 54 -
Basic
•
Refer to
P38
for information about how to play back pictures.
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the
OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording
information etc. to be added. It was established by “JEITA (Japan Electronics and Information
Technology Industries Association)”.
•
It may not be possible to rotate pictures that have been recorded with other equipment.
•
Pictures are not rotated during Multi Playback.
•
Press [MENU/SET] on the version display screen to display information about the software on the
unit.
•
Do not turn the camera off during formatting.
•
If a card has been inserted, only the card is formatted. To format the built-in memory, remove the
card.
•
If the card has been formatted on a PC or other equipment, format it on the camera again.
•
It may take longer to format the built-in memory than the card.
•
If the built-in memory or the card cannot be formatted, consult Panasonic.
•
If you set a different language by mistake, select [
~
] from the menu icons to set the desired
language.
M
[Rotate Disp.]
This mode allows you to display pictures vertically if they were
recorded holding the camera vertically.
[
] ([On]):
Rotate pictures on a TV and the LCD monitor so that they are
displayed vertically.
[
] ([External Only]):
Pictures are displayed vertically by rotating when played back on TV.
[OFF]
[Version Disp.]
It is possible to check which version of firmware is on the camera.
[Format]
The built-in memory or card is formatted.
Formatting irretrievably
deletes all the data so check the data carefully before formatting.
~
[Language]
Set the language displayed on the screen.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
For USA and Puerto Rico assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at:
http://www.panasonic.com/contactinfo
