Panasonic DMC-L1K - Lumix Digital Camera SLR Operating Instructions Manual Download Page 18

Page: 18 / 136

Preparation

VQT0W82

Charging the Battery
with the Charger

• The battery is not charged when the

camera is shipped. Charge the battery
before use.

Connect the AC cable.

• When you connect the AC cable, the

[POWER] indicator

lights red.

• The battery cannot be charged when

the DC cable is connected to the AC
adaptor.

Align the battery with the marks
on the AC adaptor and then place
it straight into the AC adaptor.
Check that it is firmly attached.

• Charging starts when the [CHARGE]

indicator

lights green.

Detach the battery after charging
is completed.

• Charging is completed when the

[CHARGE] indicator

turns off (after

about 130 minutes).

• After charging is completed, be sure to

disconnect the AC cable from the
electrical outlet.

• The battery becomes warm after using it

and during and after charging. The
camera also becomes warm during use.
This is not a malfunction.

• The battery will be exhausted if left for a

long period of time after being charged.
Recharge the battery when it is
exhausted.

• Use the dedicated AC adaptor and

battery.

• Use the AC adaptor indoors.
• Do not disassemble or modify the AC

adaptor.

Summary of Contents for DMC-L1K - Lumix Digital Camera SLR









































































































































Search results

Summary of Contents for DMC-L1K - Lumix Digital Camera SLR

Reviews:

Related manuals for DMC-L1K - Lumix Digital Camera SLR

Brands by name

Popular brands

Panasonic DMC-L1K - Lumix Digital Camera SLR, Operating Instructions Manual

Search results

Summary of Contents for DMC-L1K - Lumix Digital Camera SLR

Reviews:

Related manuals for DMC-L1K - Lumix Digital Camera SLR

Brands by name

Popular brands