Preparation/Basic “Quick Start Guide”
18
SQT1322 (ENG)
2
Press the shutter button halfway to focus.
A
Aperture value
B
Shutter speed
C
Focus indication
•
Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
•
Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the
indication flashes.)
3
Press the shutter button fully (push it in
further), and take the picture.
•
Be careful not to move the camera when you press the shutter button.
•
When the image is correctly focused, the picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].
∫
Adjust the angle of the monitor
•
Be careful not to catch your finger, etc. in the monitor.
•
When adjusting the angle of the monitor, be careful not to
apply too much force, as this may cause damage or
malfunction.
•
When not using this unit, close the monitor completely back to the
original position.
•
Return the monitor to its original position when attaching a tripod/
monopod.
•
Use of a tripod/monopod may limit the maximum angle to which
the monitor can be adjusted, depending on the type of the tripod/
monopod.
•
The [Auto Review] function displays the picture you have
just taken.
•
To display the picture in Playback Mode, press [
(
].
11
Check the picture you have taken
60
60
60
3.5
3.5
3.5
A B
C
1/98
1/98
1/98
1/98
DMC-GX80KCHWBody_EB-SQT1322_eng.book 18 ページ ２０１６年３月２８日 月曜日 午後３時８分