Panasonic DMC-GH3P, Service Manual

Page: 17 / 129

17
3.5.2. INITIAL SETTINGS:
After replacing the MAIN P.C.B., make sure to perform the initial settings after achieving the adjustment by ordering the following
procedure in accordance with model suffix of the unit.
1. IMPORTANT NOTICE:
Before proceeding Initial settings, make sure to read the following CAUTION.
2. PROCEDURES:
• Precautions: Read the above “CAUTION” carefully.
• Preparation:
Attach the fully charged Battery, and insert the SD memory card.
• Step 1. The temporary cancellation of “INITIAL SETTINGS”:
Set the [ Drive mode dial ] to “SINGLE”.
While keep pressing [ DISP. ] and [ AF/AE LOCK ] simultaneously, turn the Power on.
• Step 2. The cancellation of “INITIAL SETTINGS”:
Press the [ PLAYBACK ] button in order to enter the [ PLAYBACK ] mode.
Press [ AF/AE LOCK ] and “[ UP ] of Cursor buttons” simultaneously, then turn the Power off.
The LCD displays the “ ! ” mark before the unit powers down.
• Step 3. Turn the Power on:
Set the mode dial to [ P ] (Program AE Mode), then turn the Power on.