- 87 -
Recording
∫
Changing the settings for [Single/Burst Settings], [Step] and [Sequence] in Auto
Bracket
1
Select [Auto Bracket] in the [Rec] menu.
(P60)
2
Touch [Single/Burst Settings], [Step] or [Sequence].
3
Touch the setting.
•
You can take one picture at a time when set to [
].
•
You can continuously take pictures up to set numbers when set to [
].
•
Exit the menu after it is set.
Note
•
When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
•
The exposure may be compensated incorrectly, depending on the brightness of the subject.
•
When taking pictures continuously using Auto Bracket with [i.Resolution] set to [EXTENDED], it
may take time to record all the set number of pictures.
•
Auto Bracket is disabled in the following cases.
–
[Glistening Water], [Glittering Illuminations] and [Soft Image of a Flower] in Scene Guide
Mode
–
[Miniature Effect], [Soft Focus] and [Star Filter] in Creative Control Mode
–
When White Balance Bracket is set.
–
When recording motion pictures
–
When recording using the flash
Item
Settings
Item
Settings
[Single/Burst
Settings]
[
] (single)
[Sequence]
[0/
`
/
_
]
[
] (burst)
[
`
/0/
_
]
[Step]
[3•1/3] (3 pictures)
[3•2/3] (3 pictures)
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)