Panasonic DMC-G85KBODY, Operating Instructions Manual

Page: 254 / 338

10. Using the Wi-Fi function
254
Connecting with a password further enhances security. You can scan a QR code or
manually enter a password to set up a connection.
Preparations:
(On the camera) Set the [Wi-Fi Password] to [ON].
(P286)
∫ Using the QR code to set up a connection
Select the menu. (P51)
A
SSID and password
B
QR code
• When the camera is ready to be connected to the smartphone,
the QR code, SSID and password are displayed.
• You can also display the information by pressing [Wi-Fi] on the camera.
1
Start “Image App”.
2
Select [QR code].
• When the smartphone is connected to a wireless access point, it may take time to display
[QR code].
• (For iOS devices) A confirmation screen will be displayed. Select [OK] to proceed.
3
Use the “Image App” to scan the QR code displayed on the screen of the
camera.
• If you press [MENU/SET] on the camera, the QR code will be enlarged.
4
Install the profile.
• If a pass code is set on the smartphone, you need to enter it.
5
Press the home button to close the browser.
6
Turn on the Wi-Fi function in the setting menu.
7
On the Wi-Fi setting screen, select the SSID displayed on
the camera.
8
Start “Image App”.
• (iOS devices) Steps
1
through
5
are not required from the second
time on.
Using a password to set up a connection
On the camera
> [Setup] > [Wi-Fi] > [Wi-Fi Function] >
[New Connection]
>
[Remote Shooting & View]
On your smartphone
For iOS devices only (iPhone/iPod touch/iPad)
A B
MENU
Wi-Fi
0123456789ABC