VQT1S36
86
Advanced (Recording pictures)
∫
Setting up [
] (AF Tracking)
Note
•
If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
•
AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [
Ø
] in [AF MODE] in that case.
•
AF tracking cannot be selected for [STARRY SKY], [FIREWORKS], [PIN HOLE] or
[FILM GRAIN] in the scene mode,
$
mode, or [COLOR EFFECT] is selected.
•
[
] does not work in AF tracking.
•
The focus range is 1 cm (0.04 feet) (Wide)/2 m (6.57 feet) (Tele) to
¶
.
(Tele-macro function: 1 m (3.28 feet) to
¶
)
•
Dynamic tracking
function may not work in the following cases:
–
When the subject is too small
–
When the recording location is too dark or bright
–
When the subject is moving too fast
–
When the background has the same or similar color to the subject.
–
When jitter is occurring
–
When using the zoom
∫
About AF area selection
You can select the AF area by pressing [AF
#
/FOCUS] when [
], [
ƒ
], [
Ø
] or [
Ù
] is
selected.
It is also possible to switch to AF area selection screen by pressing
1
when AF mode is
selected with
3
/
4
.
•
You can set from the quick menu.
(P23)
When selecting [
ƒ
], [
Ø
] or [
Ù
]
1
Press
3
/
4
/
2
/
1
to move the AF area.
•
You can set to arbitrary position of the
screen. (It cannot be set to edge of the
screen)
•
After moving the AF area, press [DISPLAY]
to return it to the center.
2
Press [MENU/SET] to set.
1
Bring the subject to the AF tracking
frame, and press [AF/AE LOCK] to lock
the subject
•
AF area will continuously focus on the
subject's movement once the subject is
recognized. (
Dynamic tracking
)
•
AF tracking is canceled when [AF/AE
LOCK] is pressed again.
Before locking
Locked
2
Take the picture
ƒ Ø
Ù
DMC-FZ28P_PC.book 86 ページ ２００８年７月３日 木曜日 午後１２時１２分
