Recording
- 88 -
Applicable modes:
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to real life.
[
] ([On])/[
] ([Off])
Note
•
Even when the [Sensitivity] is set to [ISO100], [Sensitivity] may be set higher than [ISO100] if
the picture is taken with [i.Exposure] set to valid.
•
Compensation effect may not be achieved depending on the conditions.
•
[
] in the screen turns to yellow when [i.Exposure] is in effect.
Applicable modes:
You can take bright pictures in dark places by setting [Min. Shtr Speed] slower. Also, you
can set it faster to reduce the blur of the subject.
[
] ([Auto]), [
] ([1/125]), [
] ([1/60]), [
] ([1/30]), [
] ([1/15]),
[
] ([1/8]), [
] ([1/4]), [
] ([1/2]), [
] ([1])
Note
•
This should usually be set to [Auto] to take pictures. (When you select a minimum shutter
speed other than [Auto], [
] appears on the screen.)
•
When [Auto] is selected, shutter speed may be set up to 1 second when there is not much jitter
to adjust with the [Stabilizer], or when [Stabilizer] is set to [Off].
•
Setting [Min. Shtr Speed] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
•
Setting [Min. Shtr Speed] to faster speed might make the picture darker, so we recommend
recording the picture in a well-lit area. If correct exposure cannot be achieved, [
] will flash in
red when the shutter button is pressed halfway.
[i.Exposure]
[Min. Shtr Speed]
Minimum shutter speed setting
1/125
1
Brightness
Darker
Brighter
Jitter
Less
More