Panasonic DMC-FX70EB, Service Manual

Page: 11 / 67

11
[CASE 1. After replacing MAIN P.C.B.]
[Except “EG, EF, EB and EP” models: (VEP56110A is used as a Main P.C.B.]
When MAIN P.C.B. has just been replaced, all of the model suffix is displayed as follows. (Four pages in total)
[Only “EG, EF, EB and EP” models: (VEP56110B is used as a Main P.C.B.]
When MAIN P.C.B. has just been replaced, only 7 model suffix are displayed as follows. (Two pages in total)
[CASE 2. Other than “After replacing MAIN P.C.B.”]
• Step 5. Choose the model suffix in “INITIAL SETTINGS”: (Refer to “CAUTION 1”)
[Caution: After replacing MAIN P.C.B.]
The model suffix can been chosen, JUST ONE TIME .
Once one of the model suffix have been chosen, the model suffix lists will not be displayed, thus, it can not be changed.
Therefore, select the area carefully.
Select the area with touch the [ UP ] / [ DOWN ] on the touch panel.
• Step 6. Set the model suffix in “INITIAL SETTINGS”:
• The only set area is displayed, and then touch the [ END ] on the touch panel after confirmation.
(The unit is powered off automatically.)