Advanced (Recording pictures)
63
VQT1J59
• The camera uses movement detection
when automatically setting the ISO
sensitivity in the following cases.
– In intelligent auto mode [
]
– In [SPORTS], [BABY1]/[BABY2] and
[PET] in scene mode
– When [INTELLIGENT ISO] is set
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [MODE2] with
[SELF PORTRAIT] in scene mode and to
[OFF] in [STARRY SKY] in scene mode.
•
You cannot be set to [OFF] in the
intelligent auto mode [
].
• In motion picture mode [
], [MODE2]
cannot be set.
Press [
] to display the [REC] mode
menu and select the item to set. (P55)
∫
Number of pictures recorded in burst
mode
¢
The burst speed is constant regardless
of the transfer speed of the card.
• The number of pictures indicated is when
the shutter speed is faster than 1/60 and
the flash is not activated.
• The burst speed (pictures/second) may
become slower depending on the
recording environment such as in dark
places, if the ISO sensitivity is high etc.
• If you take pictures in burst mode with the
built-in memory, it will take time to write
the picture data.
• Hold down the shutter button fully to
activate the burst mode.
• You can have higher speed burst if you
use [HI-SPEED BURST] in scene mode.
Refer to P47 for information about
[HI-SPEED BURST].
•
When the burst mode setting is set to
Unlimited
–
The burst speed becomes slower
halfway.
The exact timing of this
depends on the type of card, the picture
size and the quality.
– You can take pictures until the capacity
of the built-in memory or the card is full.
• The focus is fixed when the first picture is
taken.
• The exposure and the white balance vary
depending on the burst mode setting.
When burst mode is set to [
], they are
fixed to the values set for the first picture.
When the burst speed is set to [
], they
are adjusted each time you take a picture.
• If you are following a moving subject while
taking pictures in a place (landscape)
indoors, outdoors etc. where there is a
large difference between the light and
shade, it may take time until the exposure
is stable. If burst is used at this time, the
exposure may not become optimal.
• When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
• Burst mode is not canceled when the
camera is switched off.
• When auto bracket and burst mode are
set simultaneously, auto bracket will be
performed.
• When burst mode is set, the auto review
function is activated regardless of the auto
[BURST]
Taking Pictures using Burst
Burst speed
(pictures/
second)
Number of recordable pic-
tures (pictures)
3
¢
max. 4
max. 7
approx. 2
Depends on the
remaining capacity of the
built-in memory/card.
/SET
MENU
DMC-FX33_ENG.book 63 ページ ２００７年７月９日 月曜日 午後２時１６分
