manualshive.com logo in svg

Panasonic DMC-FX48K - Lumix Digital Camera, Operating Instructions Manual, Page: 26 / 136

Share
Download
Panasonic DMC-FX48K - Lumix Digital Camera Operating Instructions Manual Download Page 26

VQT1X57

26

Preparation

•

Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DC 
coupler (DMW-DCC4; optional) when formatting. Do not turn the camera off during formatting.

•

If a card has been inserted, only the card is formatted. To format the built-in memory, remove 
the card.

•

If the card has been formatted on a PC or other equipment, format it on the camera again.

•

It may take longer to format the built-in memory than the card.

•

If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

•

If you set a different language by mistake, select [

~

] from the menu icons to set the desired 

language.

•

In Playback mode, [JITTER, SUBJ. MOVE DEMO.] cannot be displayed.

•

Press [DISPLAY] to close [JITTER, SUBJ. MOVE DEMO.]. 
Press [MENU/SET] to close [AUTO DEMO].

•

[JITTER, SUBJ. MOVE DEMO.] is an approximation.

•

[AUTO DEMO] has no TV output capability even when it is in playback mode.

 [VERSION DISP.]

It is possible to check which version of 
firmware is on the camera.

 [FORMAT]

The built-in memory or card is formatted. Formatting irretrievably 
deletes all the data so check the data carefully before formatting.

~

 [LANGUAGE]

Set the language displayed on the screen.

[ENGLISH]/[DEUTSCH]

¢

/[FRANÇAIS]

¢

/[ESPAÑOL]/

[ITALIANO]

¢

/[

繁體中文

]

¢

/[

¢

]

¢

¢

Not displayed on DMC-FX48P

 [DEMO MODE]

The camera automatically detects jitter and the movement of the 
subject and displays these on the indicator. ([JITTER, SUBJ. 
MOVE DEMO.])
The camera’s features are displayed as slide shows. ([AUTO 
DEMO])

[JITTER, SUBJ. MOVE DEMO.]

A

Jitter detection demonstration

B

Movement detection demonstration

[AUTO DEMO]:
[OFF]
[ON]

For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or 
send e-mail to: [email protected]

For USA assistance, please call:
1-800-211-PANA(7262) or, contact us via the web at: 
http://www.panasonic.com/contactinfo         

DEMO

A
B

DMC-FX48P_PC~VQT1X57_eng.book  26 ページ  ２００８年１２月２６日　金曜日　午後６時２５分

Summary of Contents for DMC-FX48K - Lumix Digital Camera









































































































































Reviews:

No comments