Advanced (Playback)
90
VQT1J82
• DPOF settings on the original picture data
will not be copied. Set the DPOF settings
again after copying is finished. (P83)
• When copying clipboard pictures onto a
card, select [COPY] on the clipboard
playback menu. (P67)
Press [
] to display the [PLAY] mode
menu and select the item to set. (P74)
Usually, it is not necessary to format the
built-in memory and the card.
Format them when the message
[BUILT-IN MEMORY ERROR] or
[MEMORY CARD ERROR] appears.
Press
3
to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
• When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
• If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
• Formatting irretrievably deletes all the
data including clipboard pictures and
protected pictures. Check the data
carefully before formatting.
• If the card has been formatted on a PC or
other equipment, format it on the camera
again.
• Use a battery with sufficient battery power
or the AC adaptor (DMW-AC5PP;
optional) when formatting.
• Do not turn the camera off during
formatting.
• It may take longer to format the built-in
memory than the card. (Max. about 15 sec.)
• You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write- Protect switch
A
is set to [LOCK].
• If the built-in memory or the card cannot
be formatted, consult your nearest
Service Center.
[FORMAT]
Initializing the built-in memory or a
card
/SET
MENU
/SET
MENU
2
For USA assistance, please call: 1-800-272-7033
or send e-mail to : [email protected]
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: [email protected]
DMC-FX33_ENG.book 90 ページ ２００７年７月９日 月曜日 午後１２時５８分