
VQT2C70
16
Preparation
∫
Using an AC adaptor (optional) and a DC coupler (optional) instead of the battery
Ensure that the AC adaptor (DMW-AC5PP;
optional) and DC coupler (DMW-DCC4; optional)
are purchased as a set. Do not use if sold
separately.
1
Open the card/battery door.
2
Insert the DC coupler, being careful of the direction.
3
Close the card/battery door.
• Ensure that the card/battery door is closed.
4
Open the DC coupler cover
A
.
• If it is difficult to open, push open the coupler cover
from the interior with the card/battery door in an
open state.
5
Plug the AC adaptor into an electrical outlet.
6
Connect the AC adaptor
B
to the [DC IN] socket
C
of the DC coupler.
D
Align the marks, and insert.
• Ensure that only the AC adaptor and DC coupler for this
camera are used. Using any other equipment may
cause damage.
Note
• Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional).
• Some tripods cannot be attached when the DC coupler is connected.
• This unit cannot stand upright when the AC adaptor is connected. When operating it on a flat
surface, we recommend placing it on a soft cloth.
• Make sure to unplug the AC adaptor when you open the card/battery door.
• If the AC adaptor and DC coupler are not necessary, then remove them from the digital
camera. Also, please keep the DC coupler cover closed.
• Also read the operating instructions for the AC adaptor and DC coupler.
• For information about optional accessories, refer to the “Digital Camera Accessory System”. (P110)
• We recommend you use a battery with sufficient battery power or the AC adaptor when
recording motion pictures.
• If while recording motion pictures using the AC adaptor the power supply is cut off due to a power cut
or if the AC adaptor is disconnected etc., the motion picture being recorded will not be recorded.
About the Built-in Memory/the Card
The following operations can be performed using this unit.
• When a card has not been inserted: Pictures can be recorded in
the built-in memory and played back.
• When a card has been inserted: Pictures can be recorded on the
card and played back.
• When using the built-in memory
k
>
ð
(
access indication
¢
)
• When using the card
†
(
access indication
¢
)
¢
The access indication lights red when pictures are being recorded
on the built-in memory (or the card).
DMC-FS7&8&6P-VQT2C70_eng.book 16 ページ 2009年2月17日 火曜日 午前11時49分