- 71 -
Recording
Applicable modes:
Pictures are taken continuously while the shutter button is pressed.
[Burst]
Settings
Description of settings
[
˜
]
([Burst On])
Burst speed
approx. 1.3 pictures/second
•
You can take pictures until the capacity of the built-in memory or the card
is full.
•
The burst speed becomes slower halfway.
The exact timing of this
depends on the type of card and the Picture Size.
•
The focus is fixed when the first picture is taken.
•
The exposure and White Balance are adjusted each time you take a
picture.
•
The Burst speed (pictures/second) may become slower depending on
the recording environment, such as in dark places, if the ISO sensitivity is
high etc.
[
]
([Hi-Speed Burst])
Burst speed
approx. 10 pictures/second
Number of recordable
pictures
max. 100 pictures
•
This can be set only during Normal Picture Mode.
•
The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•
The Burst speed changes according to the recording conditions.
•
The number of Burst recording pictures are limited by the picture-taking
conditions and the type and/or status of the card used.
•
The number of Burst recording pictures may increase when you use a
card with fast writing speed or card is formatted.
•
The focus, zoom, exposure, White Balance, shutter speed and ISO
sensitivity are fixed to the settings for the first picture.
•
The ISO sensitivity is automatically adjusted. However, the ISO
sensitivity is increased to make the shutter speed become high-speed.
•
Depending on the operating conditions, it may take time to take the next
picture if you repeat taking a picture.
[
]
([Flash Burst])
Number of recordable
pictures
max. 5 pictures
•
Still pictures are taken continuously with flash.
•
This can be set only during Normal Picture Mode.
•
The picture size is fixed to 3M (4:3), 2.5M (3:2), 2M (16:9) or 2.5M (1:1).
•
Settings for focus, zoom, exposure, shutter speed, ISO sensitivity, flash
output are fixed to the first picture.
•
Number of recordable pictures will be fixed to 5 pictures when the
self-timer is used.
•
The flash setting is fixed to [
‰
].
[OFF]
—