Panasonic Diga DMR-XS380, Operating Instructions Manual

Page: 77 / 124

Co
nve
n
ien
t func
tions
VQT2J57
77
∫ Other Satellite Tuning Menu
¾ Auto Setup
You can start the Auto Setup. ( > 13)
¾ Manual Tuning
You can set each channel manually.
1
Select “Transponder Frequency”, then enter
the frequency with the number buttons.
2
Select “Polarisation”, then select “Horizontal” or
“Vertical”.
3
Select “Symbol Rate (Ksym/s)”, then select
the rate.
4
Press [OK].
The scan starts.
¾
Add New Channels
You can add new channels found automatically.
Checking the signals starts. It takes time.
1
Press [OK].
2
Select “Free Channels” or “All Channels” then
press [OK].
The scan starts.
This may take up to 60 minutes.
“Finished” is displayed when the search is finished.
Press [BACK/RETURN
].
≥ After performing “Add New Channels” or “Manual Tuning”
if the channel number has already been assigned, channel
number for them will be assigned from 800ch onward.
∫ Signal Condition
¾ freesat Signal Condition
¾
Other Satellite Signal Condition
You can check the quality and strength of signals.
Press [
W X CH] to select the channel.
Signal Quality
Red bar: The signal quality is bad.
Orange bar: The signal quality is poor.
Green bar: The signal quality is good.
Signal Strength
“0”: Signal strength is 0%.
“10”: Signal strength is 100%.
≥ When the signal is too strong (red bar), reduce
the signal amplification at your aerial.
RETURN
Other Satellite Manual Tuning
Transponder Frequency
Polarisation
Start Scan
Select
Horizontal
10773
Symbol Rate (Ksym/s) Auto
0 Enter Frequency 9
Progress 0% 100%
No.
Free TV:0 Pay TV:0 Radio:0
Searching
Quality Type Channel Name
Satellite
RETURN
This may take up to 20 minutes.
Other Satellite Add New Channels
Astra2/Eurobird
RETURN
Change Input
freesat Signal Condition
Signal Input
LNB in 1
Channel Name
0 10
Signal Quality
0 10 Signal Strength
Satellite
Astra 28.2º E
Parameter
11428MHz, V, 27500kS/s
Channel Up
Channel Down
e.g., freesat Signal Condition
DMR-XS380EB-VQT2J57_eng.book 77 ページ ２０１０年４月２６日 月曜日 午後７時８分