66
RQT9079
Changing the unit’s settings
(All factory default settings are indicated with underlined text.)
AV2 Settings
Set to match the connected equipment.
≥
Press [OK] to show the following settings.
AV2 Input
Set to “RGB/Video” or “RGB” when receiving or recording RGB
output from external equipment.
[RGB/Video]
[RGB]
[Video]
[S Video]
AV2 Connection
(
[For]France,[Italy,[Spain[and[Switzerland]
)
This setting is fixed with “Ext” if you set “TV System” to “NTSC”
(
➡
65).
[Decoder]
When a decoder is connected to descramble the
scrambled signals (e.g., C+decoder).
[Ext]
When the VCR or a digital satellite receiver is
connected.
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (
➡
65).
[Ext Link 1]
When a digital satellite receiver which transmits a
special control signal recordings via the 21-pin
Scart cable is connected.
Start and stop timings of recording are controlled
by the control signal.
[Ext Link 2]
When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
Active Antenna
(
[For]Germany[
)
[On]
Select this when you will use indoor antenna that is not
equipped with power supply.
[Off]
Others
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic
products close together.
[DVD 1]
[DVD 2]
[DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1
Press [
3
,
4
] to select the code (“DVD 1”, “DVD 2” or
“DVD 3”) and press [OK].
To change the code on the remote control
2
While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3
Press [OK].
∫
When the following indicator appears on the
unit’s display
The unit’s remote control code
Change the code on the remote control to match the main unit’s
(
➡
step 2).
[Note]
Executing “Shipping Condition” in the Setup menu returns the
main unit code to “DVD 1”. Change the remote control code to 1
(
➡
step 2).
Setup
Tuning
Remote Control
Press “
n
” and “OK” together
for more than 5 seconds on the remote
control.
Disc
Picture
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly use the settings listed
in the method below.
≥
In the case of a power failure, the clock setting remains in
memory for approximately 60 minutes.
1
Press [
3
,
4
] to select “Off” of “Automatic” and press [OK].
2
Press [
2
,
1
] to select the item you want to change.
The items change as follows:
Hour
!#
Minute
!#
Second
!#
Day
!#
Month
!#
Year
^-----------------------------------------------------------------------------------------J
3
Press [
3
,
4
] to change the setting.
You can also use the numbered buttons for setting.
4
Press [OK] when you have finished the settings.
The clock starts.
[Note]
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
[For]France,[Italy,[Spain[and[Switzerland]
∫
To change the time offset
When the time is not correct, select the region that matches where
you live and set “Time offset” (from –2h to +2h).
1 Press [
3
,
4
] to select “On” of “Automatic” and press [OK] in
step
1
.
2 Press [
3
,
4
] to select the correct time offset and press [OK].
3 Press [OK].
Auto clock setting starts. This takes a few minutes.
“Automatic clock setting completed.” screen is displayed.
4 Press [RETURN].
Power Save
[On]
Power consumption is minimized when the unit is turned to
standby (
➡
83).
[Off]
(If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.)
≥
Refer to the following when “Power Save” is set to “On”.
– “FL Display” is automatically set to “Automatic” (
➡
64).
– The “Quick Start” function does not work. (It is automatically
turned to “Off”.)
– When the unit is off, Pay TV programmes cannot be watched
on the TV because the signal from the connected decoder is
not looped through. To watch them, turn on the unit.
Clock
Automatic
Time
Date
Plea
s
e
s
et clock manually.
OK:
s
tore RETURN: leave
OK
RETURN
S
ELECT
CHANGE
Off
15
: 45 :
3
9 1 .
8
. 200
8
0 9
Number
[For]Germany[
e.g., This screen appears
while receiving a digital
broadcast.
Clock
Time
Automatic
Time off
s
et
Date
Auto
Plea
s
e
s
et clock manually.
OK:
s
tore RETURN: leave
OK
RETURN
S
ELECT
CHANGE
15
: 45 :
3
9
3
.
8
. 200
8
Off
0 9
Number
[For]France,[Italy,[Spain[and[
[Switzerland]
e.g., This screen appears
while receiving a digital
broadcast.
Time offset
➡
below
DMREX78&88EG&EC&EF-RQT9079-L_eng.book 66 ページ ２００８年２月２７日 水曜日 午後３時１１分
