- 3 -
(
➔
page 9 of Operating Instructions, Note to owners of
progressive compatible PAL system televisions)
■
Component video output
Component signal outputs the colour difference signals (P
B
/P
R
) and luminance signal (Y) separately in order to achieve high fidelity in
reproducing colours. If the television is compatible with progressive output, a high quality picture can be output because this unit’s
component video output terminal outputs a progressive output signal (
➔
page 42 of Operating Instructions).
Connecting a television with AUDIO/VIDEO terminals and VCR
Connecting a television with S VIDEO or COMPONENT VIDEO terminals
VHF/UHF
RF IN
VHF/UHF
RF IN
R L
AUDIO OUT VIDEO OUT
AUDIO IN
R L
VIDEO IN
1
2
3
4
Audio/Video cable
This unit’s rear panel
indicates included accessories.
indicates accessories not included.
are required connections. Connect in the numbered order.
To the aerial
Splitter
Aerial
lead
Television’s rear panel
Red White Yellow
RF coaxial lead
AC mains lead
Connect only after all other
connections are complete.
To household mains socket
(AC 220-240 V, 50 Hz)
Audio/Video cable
VCR’s rear panel
Red
White
Yellow
Red White Yellow
Use a splitter if you
also want to connect
the aerial to your VCR.
You can also connect with the AV2 terminal
on this unit using the 21-pin Scart lead.
1
4
BE SURE TO READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 2 IN THE OPERATING INSTRUCTIONS
BEFORE CONNECTION.
Red
White
Yellow
AUDIO IN
R L
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
Television’s
rear panel
Red White Yellow
Audio/Video
cable
S Video cable
This unit’s
rear panel
S VIDEO OUT terminal
Connect to S VIDEO IN terminal on the television
through a S Video cable.
The S VIDEO OUT terminal achieves a more vivid
picture than the VIDEO OUT terminal. (Actual results
depend on the television.)
Red
White
Yellow
AUDIO IN
R L
VIDEO
IN
COMPONENT
VIDEO IN
S VIDEO
IN
Television’s
rear panel
Red White Yellow
Audio/Video cable
Video
cable
This unit’s
rear panel
COMPONENT VIDEO OUT terminal
Connect to COMPONENT VIDEO IN terminals on the
television through a video cable. These terminals can be
used for either interlace or progressive output
(
➔
page 42 of Operating Instructions) and provide a
purer picture than the S VIDEO OUT terminal.
•
Connect to terminals of the same colour.
•
Video output from the component terminal will have no
colour during EXT LINK recordings. Use a fully wired 21-
pin Scart lead between the TV and the unit when viewing
external equipment picture through the AV2 terminal.
Red
White
Yellow
DMR-ES10-EB_QSG-1.fm 3 ページ ２００５年２月２８日 月曜日 午後１時１７分
