file:///C|/U
...LLSVC_DSC1703003CE/viewing/SGML_VIEW_DATA/ALL/DC-GH5P/SVC/DSC1703003CE/doc/DSC1703003CE_02.xml[11/12/2018 4:22:32 PM]
1. Remove the TOP UNIT. (Refer to Disassembly Procedures.)
2. Unsolder the each soldering point of electric lead terminal for Lithium battery (Ref. No. “B7501” at bottom side of TOP UNIT) and remove
the Lithium battery together with electric lead terminal. Then replace it into new one.
NOTE:
The Lithium battery includes electric lead terminals.
NOTE:
This Lithium battery is a critical component.
It must never be subjected to excessive heat or discharge.
It must therefore only be ftted in requirement designed specifcally for its use.
Replacement batteries must be of same type and manufacture.
They must be ftted in the same manner and location as the original battery, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposed of in waste products destined for burial rather than incineration.
NOTE:
Above caution is applicable for a battery pack which is for DC-GH5/GH5M/GH5L/GH5A series, as well.
2.4 Caution for AC Cord
(For EB/GA/GC/GH)
