71
■
Memory card
When the power/card access lamp is
Blinking (when the card is being read),
do not remove the card, turn the
power off, or subject it to vibration or
impact.
Do not leave the card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated. Do not bend, drop, or
subject it to strong vibration.
•
If the above precautions are not taken,
the card or the recorded content may
be damaged.
Be sure to pull out and store the card
after use.
• Keep the card in the storage bag to
store or
carry the card around
.
• Do not allow dirt, dust or water to enter
the terminals on the back of the card.
Do not touch it with your fingers.
■
Number of recording
• The table above is the number of
recording when using SD Memory
Card (8MB). (The value is an
approximation.)
• The number of recording depends on
the subject.
• The number of remaining recording
indication on the LCD monitor may not
be decreased by taking pictures.
■
Picture data
• As a result of improper operations,
recorded data may be damaged or
erased. We are not responsible for the
loss caused by the erasure of the
recording data.
• When this message is displayed
“WAIT FOR A MOMENT”, never
remove the battery or the card, and do
not disconnect the AC adapter
(supplied) out. It may
cause damage to
the data and malfunctions.
Fine
Standard
1600
a
1200
Approx.
xx pcs.
Approx.
xx pcs.
1280
a
960
Approx.
xx pcs.
Approx.
xx pcs.
640
a
480
Approx.
xx pcs.
Approx.
xxx pcs.
Motion
image (60
seconds)
Approx. xx times
SV-AS10_PP.book 71 ページ ２００３年７月１１日 金曜日 午後８時５７分
