background image

Installation Instructions

High-spec Wired Remote Controller

Model No. 

CZ-RTC5A

English

Read through the Installation Instructions before you proceed 

with the installation.

In particular, you will need to read under the “Safety 

Precautions” on page 3.

Panasonic Corporation

1006 Kadoma, Kadoma City, Osaka, Japan

CV6233312187

Panasonic Corporation
http://www.panasonic.com

Contents

 

Part Names ....................................... 2

 

Supplied accessories ...................... 2

 

Safety Precautions ........................... 3

 

Speci

fi

 cations ................................... 4

 

Installation Precautions................... 5

 

Mounting ........................................... 7

Exposed type ................................ 7
Embedded type ............................ 8

 

Setting ............................................... 9

Language ..................................... 9
Clock ............................................ 9
Controller name ............................ 9
Service contact ........................... 10
RC. setting mode .........................11
Detailed settings ..........................11
Auto address .............................. 12
Set elec. consumption ................ 12

 

Con

fi

 rming Information ................. 13

 

Test Operation ................................ 14

AMP Air Conditioning

www.ampair.co.uk | [email protected]

Summary of Contents for CZ-RTC5A
















Reviews: