39
WARNING
Loose wiring may cause the
terminal to overheat or result
in unit malfunction. A fire
hazard may also exist.
Therefore, ensure that all
wiring is tightly connected.
When connecting each power wire to the correspond-
ing terminal, follow the instructions on “How to connect
wiring to the terminal” and fasten the wire securely with
the fixing screw of the terminal plate.
For stranded wiring
(1) Cut the wire end with a wire cutter or wire-cutting
pliers, then strip the insulation to expose the
stranded wiring about 3/8". (Fig. 4-1)
(2) Using a Phillips head screwdriver, remove the ter-
minal screw(s) on the terminal plate.
(3) Using a ring connector fastener or pliers, securely
clamp each stripped wire end with a ring pressure
terminal. (Fig. 4-1)
(4) Place the ring pressure terminal, and replace and
tighten the removed terminal screw using a
screwdriver. (Fig. 4-2)
Fig. 4-1
Stranded wire
Ring
pressure
terminal
Strip 3/8"
Fig. 4-2
Screw and
Special washer
Ring
pressure
terminal
Wire
Terminal plate
Ring pressure
terminal
Screw
Special
washer
Wire
4-4. How to Connect Wiring to the Terminal
Panasonic̲PAC-i̲OutdoorUnit̲US-l22 22
2011/07/08 9:46:23
Panasonic̲PAC-i̲IndoorUnit̲US-le39 39
Panasonic̲PAC-i̲IndoorUnit̲US-le39 39
2011/11/02 15:17:32
2011/11/02 15:17:32
