19
2.5.1 Set Automatic Recording
To enable the recording to start automatically after you turn on the
power, do the following:
1.
Press the
button to enter the
OSD menu.
2.
Press the
/
button to select
Automatic Record
and press the
button.
3.
Press the
/
button to select
On
and press the
button.
4.
Press the
button to exit the menu.
2.5.2 Set the Date and Time
To set the correct date and time, do the following:
1.
Press the
button to enter the OSD menu.
2.
Press the
/
button to select
Date / Time
and press the
button.
3.
Press the
/
button to adjust
the value and press the
button
to move to another field.
4.
Repeat step 3 until the date and time
setting is complete.
Note:
1.When the battery is drained dry and the satellite synchronization is off, the user must
reset the date/time before the function-automatic record is started. If the user doesn't
reset the date/time, the device will give you alert (you can see
the as
attached) after one minute and the automatic record will be started .
2.But if the sattlelite is synchronized ,the device can do automatic record immediately.
