background image

2

English

CY-VM7203W

3

English

CY-VM7203W

 Read the operating instructions for the unit and all other 

components of your car audio system carefully before 
using the system. They contain instructions about 
how to use the system in a safe and effective manner. 
Panasonic assumes no responsibility for any problems 
resulting from failure to observe the instructions given 
in this manual. 

 This manual uses pictographs to show you how to use 

the product safely and to alert you to potential dangers 
resulting from improper connections and operations. 
The meaning of the pictographs are explained below. 
It is important that you fully understand the meanings 
of the pictographs in order to use this manual and the 
system properly. 

Safety Information

 

Do not use the unit when it is out of order. 

  If the unit is out of order (no power, no sound) or 

in an abnormal state (has foreign objects in it, is 
exposed to water, is smoking, or smells), turn it off 
immediately and consult your dealer. 

 

The remote control unit should not lie about in the 
car. 

  If the remote control unit lies about, it could fall on 

the fl oor while driving, get wedged under the brake 
pedal, and lead to a traffi c accident. 

 

Refer fuse replacement to qualifi ed service 
personnel. 

  When the fuse blows out, eliminate the cause and 

have it replaced with the fuse prescribed for this unit 
by a qualifi ed service engineer. Incorrect replacement 
of the fuse may lead to smoke, fi re, and damage to 
the product. 

 

Do not touch the unit while the display is moving. 
Inserting hands, fi ngers or foreign objects into the 
unit can cause injuries and damage to the unit. 

 

Keep babies and children away from the unit.

 

When you connect external devices to Video Input 
Terminal (AV-IN/VIDEO 1-IN/VIDEO 2-IN), be sure to 
connect the parking brake (side brake) connection 
lead. 

Observe the following warnings when using the 
unit. 

 The driver should neither watch the display nor 

operate the system while driving. 

  Watching the display or operating the system will 

distract the driver from looking ahead of the vehicle 
and can cause accidents. Always stop the vehicle 
in a safe location and use the parking brake before 
watching the display or operating the system. 

 

Use the proper power supply.  

 This 

product is designed for operation with a negative 

grounded 12 V DC battery system. Never operate this 
product with other battery system, especially a 24 V 
DC battery system. 

 

 Keep a battery away from children to avoid the risk 

of accidents. If an infant ingests a battery, please 
seek immediate medical attention. 

  Batteries and insulation fi lm can be ingested, so keep 

them out of the reach of infants. If and infant ingests 
a battery or insulation fi lm, please seek immediate 
medical attention. 

 

Do not disassemble or modify the unit. 

  Do not disassemble, modify the unit or attempt to 

repair the product yourself. If the product needs to 
be repaired, consult your dealer or an authorised 
Panasonic Service Center. 

Warning

Observe the following warnings when installing. 

 

Disconnect the lead from the negative (

) battery 

terminal before installation.  

  Wiring and installation with the negative (

) battery 

terminal connected may cause electrical shock and 
injury due to a short circuit. 

  Some cars equipped with the electrical safety 

system have specifi c procedures of battery terminal 
disconnection. 

  FAILURE TO FOLLOW THE PROCEDURE MAY 

LEAD TO THE UNINTENDED ACTIVATION OF THE 
ELECTRICAL SAFETY SYSTEM RESULTING IN 
DAMAGE TO THE VEHICLE AND PERSONAL INJURY 
OR DEATH. 

 

Never use safety-related components for 
installation, grounding, and other such functions. 

  Do not use safety-related vehicle components (fuel 

tank, brake, suspension, steering wheel, pedals 
airbags, etc.) for wiring or fi xing the product or its 
accessories. 

 

Installing the product on the air bag cover or in a 
location where it interferes with airbag operation is 
prohibited. 

 

Check for piping, gasoline tank, electric wiring, and 
other items before installing the product. 

  If you need to open a hole in the vehicle chassis to 

attach or wire the product, fi rst check where the wire 
harness, gasoline tank, and electric wiring are located. 
Then open the hole from outside if possible. 

 

Never install the product in a location where it 
interferes with your fi eld of vision. 

 

Never have the power cord branched to supply other 
equipment with power. 

 

After installation and wiring, you should check the 
normal operation of other electrical equipment.  

  The continuation of their using in abnormal conditions 

may cause fi re, electrical shock or a traffi c accident. 

 

In the case of installation to an airbag-equipped 
car, confi rm warnings and cautions of the vehicle 
manufacturer before installation. 

 

Make sure the leads do not interfere with driving or 
getting in and out of the vehicle. 

 Insulate all exposed wired to prevent short 

circuiting. 

This pictograph intends to alert you to 
the presence of important operating 
instructions. Failure to heed the 
instructions may result in severe injury or 
death.

This pictograph intends to alert you to 
the presence of important operating 
instructions. Failure to heed the 
instructions may result in injury or 
material damage.

Warning

Caution

1

2

This unit is designed for users to connect one or more system upgrading devices to Panasonic car audio/AV unit 
at the same time. For more details about safety information, refer to the operating instructions for the connected 
devices. 

Warning

Summary of Contents for CY-VM7203W






















Reviews: