background image

 Observe the following warnings 
when installing.

R

  Use on a DC 12 V 

 grounded vehicle.

   This system can only be used on a DC 12 V 

grounded vehicle. It cannot be used in DC 24 V 
and other battery system (large trucks, diesel 
vehicles for use in cold regions, etc.). Use on 
such vehicles would cause fi re and breakdown.

R

  Disconnect the battery 

 terminal during 

performing any wiring or installation work.

   Wiring or installation work with the battery 

terminal connected could cause electric shock 
and injury from shorting.

R

  This system should be installed in a way so 

that operation of vehicle protective devices 
such as an air bag is not hindered.

   Should this system be installed in a vehicle 

with a protective device such as an air bag 
or an anti-theft system, check with the car 
manufacturer about operational cautions 
prior to attempting installation and perform 
the installation in a safe and proper manner. 
Improper removal of the battery may result in 
a malfunction of a device or possibly death.

R

  Never use the security parts of the vehicle 

for mounting or grounding the system.

   Use of the bolts or nuts of security parts 

(steering, brake systems, fuel tank etc.) can 
cause brake failure, fi re, or other accidents.

R

  Check positions of pipes, tanks, electric 

wirings in the vehicle when mounting.

   Never interfere with or touch pipes, tanks, 

or electric wirings when opening holes in 
the vehicle body for installation. Apply rust 
prevention and waterproofi ng treatments to 
the processed area, as rust or water leakage 
may result in a fi re, an electric shock, or other 
accident.

R

  Route cords so that they do not get in the 

way of occupants driving or getting into or 
out of the vehicle.

   Route cords so that they do not tangle with the 

steering wheel, shift lever, brake pedals, feet 
etc., and bundle and fasten them appropriately. 
Poorly arranged cords can cause accident and 
injury.

R

  Wire and mount the system as instructed.

   Fire or accident could result if wiring and 

mounting do not properly follow the operating 
instructions.

R

  Do not attempt to disassemble, repair or 

modify the system.

   Never attempt to disassemble, repair or modify 

the system, or to remove cord insulation to 
take power supply from other devices. Fire, 
electric shock or accident could result. 

R

  After mounting and wiring the system, check 

that all vehicle systems function normally.

   If any vehicle equipment (brakes, lights, horn, 

hazard and indicator lights etc.) does not work 
normally, fi re, electric shock or accident could 
result.

R

  Keep screws and other small components 

away from small children.

   There is a risk that they could swallow 

small components. Seek immediate medical 
attention if that happens.

  Warning

Summary of Contents for CY-RC50KN





















Reviews: