background image

6

English

CY-PA4003W/PA2003W/PAD1003W

7

CY-PA4003W/PA2003W/PAD1003W

Contents

Safety Information .....................  2

Before Reading These Instructions ...  6
Before Use ..............................  7
Features .................................   8
Location of Controls .................. 10

Speaker System Setting 
 <CY-PA4003W> 

.................... 14

Speaker System Setting 
 <CY-PA2003W> 

.................... 17

Speaker System Setting 
 <CY-PAD1003W> 

.................. 18

Note for Bridge Speaker Connection .... 19

Installation ............................. 20
Wiring .................................. 22
Wiring <CY-PA4003W> .............. 24

RCA .......................................................... 24
SPEAKERS INPUT .................................... 25

Wiring <CY-PA2003W> .............. 26

RCA .......................................................... 26
SPEAKERS INPUT .................................... 27

Wiring <CY-PAD1003W> ............. 28

RCA .......................................................... 28
SPEAKERS INPUT .................................... 29

Troubleshooting ....................... 30
Maintenance ........................... 32
Specifi cations ......................... 32

Before Reading These Instructions

Differences among 3 Models 

This Operating instruction manual is for 3 models CY-PA4003W, CY-PA2003W and CY-PAD1003W. All illustrations 
throughout this manual represent model CY-PA4003W unless otherwise specifi ed. The following table describes the 
differences among 3 models. 

Models 

Features

CY-PA4003W

CY-PA2003W

CY-PAD1003W

Speaker connection

4/3/2-channel speaker

2/1-channel speaker

1-channel speaker

Maximum power output

250 W

4 channel

600 W

2 channel

1 100 W

1 channel

Input channel 

4-channel

2-channel

2-channel

4CH/2CH input selection

Yes

No

No

HPF (High Pass Filter)

Yes

Yes

No

Subsonic fi lter switch

No

No

Yes

Fuse 35 

A

2

25 A

3

25 A

3

Speaker input connector

2 (1 for front speaker, 1 for 
rear speaker)

1 (for left/right speaker)

1 (for left/right speaker)

Panasonic welcomes you to our constantly growing 
family of electronic products owners. We endeavor to give 
you the advantages of precise electronic and mechanical 
engineering, manufactured with carefully selected 
components, and assembled by people who are proud 
of the reputation their work has built for our company. 
We know this product will bring you many hours of 
enjoyments, and after you discover the quality, value and 
reliability we have built into it, you too will be proud to be 
a member of our family. 

CY-PA4003W 
4 Channel Power Amplifi er 

CY-PA2003W 
2 Channel Power Amplifi er 

CY-PAD1003W 
Digital Mono Amplifi er 

Accessories

Item

Diagram

Qty.

Operating Instructions 

(YEFM285832A) 

1

Installation Hardware (screws, cords, etc.) (page 20)

Note: 

 The number in parenthesis underneath each accessory 

part name is the part number for maintenance and 
service. 

 Accessories and their parts numbers are subject to 

modifi cation without prior notice due to improvements. 

English 2

 Check the connections according to the manual of 

the device you have connected, and switch on the 
connected device’s power supply. 

 Adjust the GAIN to a satisfactory volume. (page 11, 12) 

 Refer to individual instruction and installation manuals 

for each device for detailed installation and wiring.

Before Use

Summary of Contents for CY-PA2003W



















Reviews: