background image

8

Retroreflective types for sensing transparent objects

Item

Short sensing range

Standard sensing range

Long sensing range

NPN output

CX-481

*1

*1

Model nos. with the suffix -J indicate the M12 pigtailed type. The suffix -Z indicates the M8 connector type. Thru-beam model nos. with the suffix “

E

” shown 

on the label affixed to the sensor is the emitter; “

D

” is the receiver. The retroreflective type sensor model no. with the suffix “

-Y

” comes without the 

RF-230

 

reflector.

CX-483

*1

CX-482

*1

PNP output

CX-481-P

*1

CX-483-P

*1

CX-482-P

*1

Sensing range

50 to 500mm

*2

*2

The sensing range and the sensing object for the retroreflective type sensor is specified for the 

RF-230 

reflector. For more detailed information, please refer 

to the 

CX-400 Series User’s Manual

. After installation, be sure to check operation under actual conditions.

50 to 1000mm

*2

0.1 to 2m

*2

Installation range for the 
reflector

100 to 500mm

*2

100 to 1000mm

*2

0.8 to 2m

*2

Object to be sensed



50mm or more for opaque, translucent or transparent object

*2

Repeatability

(perpendicular to sensing axis)

0.5mm or less

Supply voltage

12 to 24V DC ±10% Ripple P-P 10% or less

 

Current consumption

10mA or less

Output

NPN or PNP output type

• NPN or PNP open-collector transistor

NPN

: Maximum sink current: 100mA; 

PNP

: Maximum source current: 100mA

• Applied voltage: 30V DC or less (

NPN

: between output and 0V; 

PNP

: between output and +V)

• Residual voltage:

NPN

: 2V or less (at 100mA sink current), 1V or less (at 16mA sink current)

PNP

: 2V or less (at 100mA source current), 1V or less (at 16mA source current)

Output operation

Light-ON or Dark-ON

Short-circuit 
protection

Incorporated

Response time

1ms or less

Automatic interference 
prevention function

Incorporated

Protection

IP67 (IEC)

Ambient temperature

-25 to +55°C (No dew condensation or icing allowed), Storage: -30 to +70°C

Ambient humidity

35 to 85% RH, Storage: 35 to 85% RH

Emitting element

Infrared LED

Material

Enclosure: PBT, Lens: Polycarbonate, Indicator cover: Polycarbonate

Cable

0.2mm

3-core (thru-beam type sensor emitter: 2-core) cabtyre cable, 2m long

Weight

Net

Approx. 50g

Gross

Approx. 80g

Accessory

*3

*3

The RF-230 reflector is included with the product. Other reflectors and reflective tape are available for purchase. For more detailed information, please refer 

to the 

CX-400 Series User’s Manual

.

RF-230 (Reflector): 1 pc.

Ramco National

www.PanasonicSensors.com

1-800-280-6933

Summary of Contents for CX-400 Series










Reviews: