Panasonic CT36HL43G - 36" COLOR TV, Service Manual

Page: 33 / 174

NOTE
After receiver is set into service mode, set TIMER back to NO.
To toggle between aging and service modes:
While the “CHK” is displayed on the left top corner of the CRT, pressing “ACTION” and “VOL”
UP on the TV simultaneously will toggle between the modes. Red “CHK” for serviceand yellow
“CHK” for aging.
7. Press POWER on the remote control to display the service
adjustment modes menu, select adjustment by pressing the
volume right/left buttons and channel up/down buttons on the
remote and ACTION to enter the adjustment.
NOTE
Some adjustments are available only in some modes (480i, 480p, 1080i); it is needed to apply the
format. A 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51 set-top box DTV
decoder.
Exiting the service mode:
This TV goes out from service mode when it is unplugged or turned OFF. To exit the service
mode, turn the TV OFF or unplug the TV from A.C.
Other method
Press ACTION and POWER on the receiver simultaneously for at least 2 seconds.
The receiver momentarily shuts off; then comes back on tuned to channel 3 with a preset level of
sound.
Any programmed channels, channels caption data and some others user defined settings will be
erased when exited by pressing ACTION and POWER on receiver.
33