- 20 -
Instructional Flow Chart for Service Mode
Figure 16. Flow Chart for Service Mode.
Place jumper across terminals
on AG Connector
Adj.
needed?
NORMAL MODE
Momentarily short FA1 to FA2 (
).
Press Volume Up Simultaneously (ON Receiver)
Adj.
needed?
WHITE
SCREEN
(ON REMOTE)
RECALL
WHITE
SCREEN
RED
SCREEN
GRN.
SCREEN
BLUE
SCREEN
POWER
(ON REMOTE)
AGING MODE
•
Yellow “CHK” appears in upper left corner of screen.
•
Volume Up/Down operate rapidly.
•
Custumer Controls are set to nominal level.
SERVICE MODE
•
“CHK” turns red.
•
Volume Up/Down operate normally.
•
Custumer Controls are set to nominal level.
SUB-DATA ADJUSTMENTS.
B ITEMS.
QUICK ENTRY TO SERVICE MODE
•
Select CABLE Mode.
•
Set SLEEP time for 30, 60 or 90 Min.
•
Tune to Channel 124.
•
Adjust Volume to minimum.
•
Press VOL DOWN. On Receiver.
EXIT
EXIT
N
Y
N
Y
C
(ON REMOTE)
RECALL
Press Action and Power on the Receiver
simultaneously for at least 2 seconds.
ON REMOTE CONTROL TO
SELECT ADJUSTMENT
ON REMOTE TO ADJUST
THE LEVEL
CH
VOL VOL
POWER
(ON REMOTE)
A
IMPORTANT
Always Exit the Service Mode
Following Adjustments.
Place jumper across terminals
on AG Connector
Remove jumper
from
AG Connector
Summary of Contents for CT27G6DE - 27" COLOR TV
Page 19: ... 19 Notes ...
