NOTE
Some adjustments are available only in some modes (480i, 480p, 1080i); it is needed to apply the format. A 1080i, 480p, 480i pattern can be obtained from Panasonic’s TU-DST51
set-top box DTV decoder.
Exiting the service mode:
This TV goes out from service mode when it is unplugged or turned OFF. To exit the service mode, turn the TV OFF or unplug the TV from A.C.
Other method
Press ACTION and POWER on the receiver simultaneously for at least 2 seconds.
The receiver momentarily shuts off; then comes back on tuned to channel 3 with a preset level of sound.
Any programmed channels, channels caption data and some others user defined settings will be erased when exited by pressing ACTION and POWER on receiver.
IMPORTANT NOTE
Always check that the TV exits the service mode.
To confirm colors
When in service mode (red “CHK” is displayed) press RECALL on the remote control to enter the purity field check mode
Entering service mode (open-back method)
While the receiver is connected and operating in normal mode, momentarily short test point
FA1 (A15 pin 2) to cold ground (A-Board).
The receiver enters the aging mode.
Yellow letters “CHK” appear in the upper left corner of the screen.
(The volume right/left and channel up/down will adjust rapidly).
12.1 Service adjustment default values for service items
REGISTER
DESCRIPTION
FORMAT
FULL JUST ZOOM
MTSIN
INPUT LEVEL
1D
N/A
N/A
SEPAL
LOW LEVEL SEPARATION
08
N/A
N/A
SEPAH
HIGH LEVEL SEPARATION
1D
N/A
N/A
CLOCK
CLOCK
125
N/A
N/A
COLOR
COLOR
1F
N/A
N/A
TINT
TINT
7D
N/A
N/A
BRIGH
SUB-BRIGHTNESS
09 3E N/A
N/A
CONT
SUB-CONTRAST
02 89 N/A
N/A
B-Y_G
MAGENTA TINT ADJ
3D
N/A
N/A
Page 9 of 30
11/3/2008
http://tsn.pstc.panasonic.com/viewing/NA/CT-26WX15N/SIMP/MTNC050528A1/doc/M...
