- 25 -
Hotel mode feature
This models have as a main feature the hotel mode, this mode allows to program the receiver with exactly the
same settings than other TV, using a “clone box” (Only models with digital interface).
Important Note: Make sure to use NA7D chassis
family as a master television to clone;
If a different chassis family is used, it
may be a cause for malfunction.
Clone box use
The clone box uploads (LEARN) the settings
of one television and downloads (TEACH)
them to other televisions. This places the
television into hotel mode.
Note:
The clone box is not supplied with the set. It
can be purchased separately.
Setting the “master” television
The features listed in the hotel mode table
must be adjusted before cloning can begin.
1. Turn the television ON.
2. Access the main menu by pressing the
ACTION button.
3. Access the SET UP menu.
•
Use the CH and VOL buttons to highlight
the SET UP icon, then press the ACTION
button.
•
Use the CH buttons to highlight AUTO
PROG (auto channel programming), then
press
the
VOL
button
to
begin
programming.
Note:
This step is mandatory.
•
If
necessary,
use
MANUAL
PROG
(manual channel programming) to delete
any undesired channels.
•
Press the ACTION button to return to the
main menu.
4. If necessary, access the PICTURE
menu.
•
Use the CH and VOL buttons to highlight
the
PICTURE
icon,
then
press
the
ACTION button.
•
Use the CH buttons to highlight a feature,
then press the VOL buttons to adjust
them.
•
Press the ACTION button to return to the
main menu.
5. If desired, access the channel caption
menu.
•
Use the CH and VOL buttons to highlight
the CH CAP icon, then press the ACTION
button.
•
Use the CH buttons to highlight the
channel number, then press the VOL
buttons
to
select
characters for the
channel caption.
•
Press the ACTION button to return to the
MAIN MENU.
6. If desired, access the TIMER menu to
set the ENERGY MANAGEMENT
FEATURE. This feature lets you
program the television to turn OFF
after a pre-determined period of time
from the last keyed-in instruction
(pressing any buttons on TV or on the
remote control) received by the
television.
•
Use the CH and VOL buttons to highlight
the Timer icon, then press the ACTION
button.
•
Use the CH buttons to highlight the
energy management feature.
•
Press VOL right or left button to select
OFF or 1 through 15 hours.
7. Exit the main menu by pressing the
ACTION button.
8. If necessary, set the maximum volume
level.
9. If the hotel has hotel “barker” channel,
tune the set to the “barker” channel.
Note:
Auto power ON feature setting can also be
cloned.
IMPORTANT
When the set is in stand-alone (SA) hotel mode,
(no digital interface connected to TV) The menu
screen can only be accessed using the ACTION
button on the Panasonic remote control or TV set.
When the set is in slave-to-mate (STM), hotel
mode (using the digital interface) the menu screen
can be accessed only using the hotel remote
control.
Models CT-2512HE/HCE
Models CT-2512HE/HCE does not have a
digital interface on the back of the television.
To set the television, use the front panel.
Summary of Contents for CT2022HE - 20" HOTEL/MOTEL TV
Page 49: ... 49 Todos los Modelos All Models Diagrama Impreso Tarjeta A A Board Layout ...
Page 64: ... 64 NOTES ...
Page 65: ... 65 NOTES ...
