Panasonic CT-27HL15N, Service Manual

Page: 9 / 32

1. Select an active TV channel and confirm that horizontal is in sync.
2. Adjust BRIGHTNESS and PICTURE using PICTURE icon menu so video just disappears.
3. Confirm B+ 142 ± 6.0V is within limit.
4. Using a high voltage meter confirm that the high voltage is 29.5kV ± 0.3kV.
7.1 Service adjustment default values for service items
NOTE:
The above table shows the default values for the service items, this values may vary depending on the serviced TV.
Important Note:
When changing “ID” register, message “Unplug AC to activate” will appear on the screen and the set must be unplugged.
REGISTER DESCRIPTION
FORMAT
4:3
16:9
MTSIN INPUT LEVEL 22 N/A
SEPAL LOW LEVEL SEPARATION 07 N/A
SEPAH HIGH LEVEL SEPARATION 22 N/A
CLOCK CLOCK 131 N/A
COLOR COLOR 1F N/A
TINT TINT 7D N/A
BRIGH SUB-BRIGHTNESS 09 53 N/A
CONT SUB-CONTRAST 02 A0 N/A
B-Y_G MAGENTA TINT ADJ 3D N/A
CUT G GREEN CUT-OFF 01 15 N/A
CUT R RED CUT-OFF 01 1A N/A
CUT B BLUE CUT-OFF 01 17 N/A
BRT BRIGHT 09 53 N/A
R DR RED DRIVE 90 N/A
B DR BLUE DRIVE 95 N/A
R-Y_A R-Y_A 80 N/A
HLIN HORIZONTAL LINEARITY 80 N/A
HPOS HORIZONTAL POSITIONING 03 42 N/A
HWID HORIZONTAL WIDTH 95 N/A
PCC PINCUSHION CORRECTION D3 BD
PCCHG PINCUSHION HIGH 38 43
PCCLG PINCUSHION LOW 39 3F
PCCHS PINCUSHION HIGH 05 05
PCCLS PINCUSHION LOW 05 05
TOPG TOP CORNER PINCUSHION 58 58
BTMG BOTTOM CORNER PINCUSHION 58 58
TOPSL TOP CORNER PINCUSHION SLICE LEVEL 03 03
BTMSL BOTTOM CORNER PINCUSHION SLICE LEVEL 03 03
TRAP TRAPEZOID 80 80
PARA PARALLELOGRAM 10 10
SIDE E-W PINCUSHION ADJUSTMENT 16 16
HTRAP HORIZONTAL TRAPEZOID 20 20
VRAS VERTICAL POSITION CA D6
VEAMP VERTICAL SIZE 01 0F 00 56
V-C VERTICAL LINEARITY 70 72
V-S VERTICAL S CORRECTION 56 58
HDAFS HORIZONTAL DAF PHASE 00 A4 N/A
VTOP VTOP 00 C4 00 B0
BDAC BDAC 73 N/A
INPIN INPIN 20 20
MOIRE MOIRE 80 80
ID ID 32 32
Page 9 of 32
7/7/2008 http://tsn.pstc.panasonic.com/viewing/NA/CT-27HL15N/SIMP/MTNC050426A1/doc/MTN...