Panasonic CT-1388YD Service Manual Download Page 9

Page: 9 / 70

- 9 -

Location of controls (remote) Cont.

(for models with remote control)

Figure 3. Location of controls (remote).

POWER button

Press to turn ON and OFF.

MUTE button

Press to mute sound. A second press

resumes sound. Press also to access

and delete closed caption display.

TV/VIDEO button

Press to select TV or Video input.

VOLUME buttons

Press to adjust TV sound level. Use

with channel buttons to navigate in

menus.

CHANNEL buttons

Press to select channels. Use with

volume buttons to navigate in menus.

ACTION button

Press to display main menu and

access or exit on screen features and

adjustment menus.

Keypad buttons

Press desired channel number to

randomly access any channel.

R-TUNE (rapid tune) button.

Press to switch to the previous

channel.

RECALL button

Press to display time, status of sleep

timer, channel, video mode and

channel caption (station identifier).

EUR501450

Summary of Contents for CT-1388YD







































































Search results

Summary of Contents for CT-1388YD

Reviews:

Brands by name

Popular brands

Panasonic CT-1388YD, Service Manual

Search results

Summary of Contents for CT-1388YD

Reviews:

Brands by name

Popular brands