background image

Cleaning the Air Conditioner

Cleaning has to be carried out at regular 
intervals to ensure the unit is at optimal 
performance. A dirty unit may cause 
malfunction and you may retrieve “H 99” 
error code. Consult an authorised dealer.

• Before cleaning, switch off the power supply and 

unplug the unit.

• Do not touch the aluminium 

fi

 n as the sharp parts 

may cause injury.

• Do not use benzine, thinner or scouring powder.
• Use soap (  pH 7) or neutral household 

detergent only.

• Do not use water hotter than 40 °C / 104 °F.

Indoor unit
(

 

Structure of the unit may vary depending on 
the model)

Outdoor unit

Clean the debris that surround the 

unit.

Clear any blockage from the drain 

pipe.

nanoe

TM

-G Generator

Once every 2 weeks

• Clean with dry cotton bud.

• Do not touch during operation.

Air 

fi

 lters

Once every 2 weeks

• Wash/rinse the 

fi

 lters gently with 

water to avoid damaging the 

surface.

• Dry the 

fi

 lters thoroughly under a shade, away 

from 

fi

 re or direct sunlight.

• Replace any damaged 

fi

 lters.

Remove air 

fi

 lter

Attach air 

fi

 lter

Remove from the unit

Insert into the unit

AUTO

OFF/ON

Aluminium 

fi

 n

Front panel

Air 

fi

 lters

nanoe

TM

-G Generator

Indoor unit

Do handle the unit surface with 

care to avoid scratches by sharp 

or rough items (e.g. 

fi

 ngernails, 

tools, rings, etc). Wipe the unit 

gently with a soft damp cloth.
The coils and fans should be cleaned periodically 

by an authorised dealer.

Front panel

Wash gently and dry.

How to remove front panel

AUTO
OFF/ON

2

  

Slide the 

front panel to 
right 

A

 and 

pull out 

B

.

1

 

Raise up.

B

A

Close it securely

AUTO
OFF/ON

2

  

Match and 
push in.

1

 

Hold horizontally.

3

 

Close down.

4   Press both ends and center of the front panel.

To

 Learn More... / Cleaning the 

Air Conditioner

English

39

Summary of Contents for CS-Z9ZKA



























Reviews: