Panasonic CS-Z20VKEW, Operating Instructions Manual

Page: 101 / 116

101
Español
Next, setup the wireless network connec Ɵ on of
air-condi Ɵ oner.
Connection Guide
Step 1 Step 2 Step 3
Cancel
To wireless network settings To wireless network settings
Connect the network adaptor to the wireless
router.
Select your wireless router
Connection Guide
Step 1 Step 2 Step 3
Cancel
MAC address of target device
d8-61-62-2e-44-da
Note:
Select 2.4 GHz band if the wireless router
supports both 2.4 GHz and 5 GHz band.
router SSID1
router SSID2
router SSID3
router SSID4
router SSID5
Other
Connection Guide
Step 1 Step 2 Step 3
Cancel
OK
ŶƚĞƌĂŶĚƐĞůĞĐƚƚŚĞĨŽůůŽǁŝŶŐŝŶĨŽƌŵĂƟŽŶŽĨƚŚĞ
wireless router.
Network name (SSID)
Network name (SSID)
Password
Security
WPA2
Password
Connect the air-condi Ɵ oner to the
wireless router.
Select your wireless router
Connection Guide
Step 1 Step 2 Step 3
Cancel
MAC address of target device
d8-61-62-2e-44-c0
Note:
Select 2.4 GHz band if the wireless router
supports both 2.4 GHz and 5 GHz band.
Panasonic-factory-wireless-ap-00
Connect the air-condi Ɵ oner to the
wireless router.
Select your wireless router
Connection Guide
Step 1 Step 2 Step 3
Cancel
MAC address of target device
d8-61-62-2e-44-c0
Note:
Select 2.4 GHz band if the wireless router
supports both 2.4 GHz and 5 GHz band.
Panasonic-factory-wireless-ap-00
Enter the password of the selected
wireless router.
Password
Password
Cancel OK
3
Seleccione el SSID de su router inalámbrico. Introduzca la contraseña para conectar el
aire acondicionado al router inalámbrico.
4
Cuando la conexión del aire acondicionado con el router es correcta, el led de la red LAN
inalámbrica cambiará de estar parpadeando a estar ENCENDIDO. Si el led de la red
LAN inalámbrica está ENCENDIDO, conecte el smartphone al router inalámbrico. (vuelva
a esta aplicación después de completar los ajustes de la red inalámbrica para continuar
con la con fi guración)
• Si el led de la red LAN inalámbrica sigue parpadeando, compruebe la conexión al router
inalámbrico.
Connection Guide
Step 1 Step 2 Step 3
When the connec Ɵ on of air-condi Ɵ oner to
router is successful, the Wireless LAN LED
changes from blinking to ON.
*It may take up to few minutes before changes
to ON.
If Wireless LAN LED keep blinking, tap “Check”
If the Wireless LAN LED is ON, connect the
smartphone to wireless router. (return to this
ĂƉƉůŝĐĂƟŽŶĂŌĞƌĐŽŵƉůĞƟŶŐƚŚĞǁŝƌĞůĞƐƐ
ŶĞƚǁŽƌŬƐĞƫŶŐƐƚŽĐŽŶƟŶƵĞƚŚĞƐĞƚƵƉͿ
Cancel
Check
To wireless network settings of the smartphone.
Wi-Fi
router SSID1
CHOOSE A NETWORK...
router SSID3
router SSID2
router SSID4
Other...
Ask to Join Networks
<ŶŽǁŶŶĞƚǁŽƌŬǁŝůůďĞũŽŝŶĞĚĂƵƚŽŵĂƟĐĂůůLJ͘/ĨŶŽŬŶŽǁŶ
network are available, you will be asked before joining a
new network.
Wi-Fi ^ĞƫŶŐƐ
Searching for air-condi Ɵ oner.
Please wait…
Connection Guide
Step 1 Step 2 Step 3
Cancel
Forma de uso