Panasonic CS-XU9ZKH-8, Operating Instructions Manual

Page: 17 / 24

17
To Learn More...
How to Use /
To
Learn More...
Operation mode
iAUTO-X : Provides fast cooling operation which is ideal on a hot day.
COOL : Provides ef fi cient comfort cooling to suit your needs.
DRY : Operates at low fan speed for a gentle cooling operation.
When FAN AUTO is selected, DRY mode will operate with humidity control.
Energy saving temperature setting
You may save energy when operating the unit within the recommended temperature range.
COOL: 26.0 °C ~ 28.0 °C / 79 °F ~ 82 °F.
Air fl ow direction
In iAUTO-X mode:
The horizontal fl ap swings up/down automatically at a predetermined position.
Once the temperature is achieved, the horizontal fl ap is fi xed at upper position.
In COOL mode:
The horizontal fl ap is fi xed at middle position setting.
Once the temperature is achieved, the horizontal fl ap swings up/down automatically.
In DRY mode with Humidity Control:
If FAN AUTO is set, the horizontal fl ap swings up/down automatically.
Once the temperature is achieved, the horizontal fl ap is fi xed at the predetermined
position.
In DRY mode without Humidity Control:
The horizontal fl ap is fi xed at middle position setting.
Once the temperature is achieved, the horizontal fl ap swings up/down automatically.
In iAUTO-X/COOL/DRY mode:
The horizontal fl ap swings up/down automatically.
Auto restart control
When power is resumed after a power failure, the operation will restart automatically with the last
operation mode and air fl ow direction.
• This control is not applicable when TIMER is set.
Inside Cleaning
This function is to enhance the inside cleaning of the air conditioner indoor unit.
To activate inside cleaning, turn off the unit and press button for more than 3 seconds from
remote control. During inside cleaning operation, nanoe™X will turn on and horizontal fl ap is open with
low fan speed operation for a maximum of 2.5 hours before the unit is turned off. Do not turn off the
power supply during this operation. The inside cleaning operation is completed when the fan stops and
the fl ap is close. When power is resume after failure, this operation will not resume.
Operating conditions
Use this air conditioner in the temperature range indicated in the table.
Temperature °C (°F)
Indoor Outdoor
DBT WBT DBT WBT
COOL
Max. 32 (89.6) 23 (73.4) 46 (114.8) 26 (78.8)
Min. 16 (60.8) 11 (51.8) 16 (60.8) 11 (51.8)
DBT: Dry bulb temperature, WBT: Wet bulb temperature
English