6
Safety precautions
Prevent electric shock by switching off
the power supply and unplug:
- Before cleaning or servicing,
- When extended non-use, or
- During abnormally strong lightning
activity.
Precaution for using R32 refrigerant
Pay careful attention to the following points
when operating the appliances and dealing
with different refrigerants.
Since the working pressure is higher
than that of refrigerant R22 models,
some of the piping and installation and
service tools are special.
Especially, when replacing a
refrigerant R22 model with a new
refrigerant R32 model, always replace
the conventional piping and
fl
are nuts
with the R32 and R410A piping and
fl
are nuts on the outdoor unit side.
For R32 and R410A, the same
fl
are
nut on the outdoor unit side and pipe
can be used.
Models that use refrigerant R32 and
R410A have a different charging port
thread diameter to prevent erroneous
charging with refrigerant R22 and for
safety.
Therefore, check beforehand. [The
charging port thread diameter for R32
and R410A is 12.7 mm (1/2 inch).]
Be more careful than R22 so that
foreign matter (oil, water, etc.) does
not enter the piping.
Also, when storing the piping, securely
seal the opening by pinching, taping,
etc. (Handling of R32 is similar to
R410A.)
This appliance shall be stored in a well
ventilated area.
This appliance shall be stored in a
room without continuously operating
open
fl
ames and ignition sources.
This appliance shall be stored so as
to prevent mechanical damage from
occurring.
CAUTION
Indoor unit and outdoor unit
Do not wash the indoor unit with water,
benzine, thinner or scouring powder to
avoid damage or corrosion at the unit.
Do not use for preservation of precise
equipment, food, animals, plants,
artwork or other objects. This may
cause quality deterioration, etc.
Do not use any combustible equipment
in front of the air
fl
ow outlet to avoid
fi
re
propagation.
Do not expose plants or pet directly to
air
fl
ow to avoid injury, etc.
Do not touch the sharp
aluminium
fi
n, sharp parts
may cause injury.
Do not switch ON the indoor unit when
waxing the
fl
oor. After waxing, aerate
the room properly before operating the
unit.
Do not install the unit in oily and
smoky areas to prevent damage to the
unit.
Do not dismantle the unit for cleaning
purpose to avoid injury.
Do not step onto an unstable bench
when cleaning the unit to avoid injury.
Do not place a vase or water container
on the unit. Water may enter the unit
and degrade the insulation. This may
cause an electric shock.
Do not open window or door for
long time during operation, it may
lead to inef
fi
cient power usage and
uncomfortable temperature changes.
Prevent water leakage by ensuring
drainage pipe is:
- Connected properly,
- Kept clear of gutters and containers,
or
- Not immersed in water
After a long period of use or use with
any combustible equipment, aerate the
room regularly.
Summary of Contents for CS-VZ9SKE
Page 86: ...Memo...
Page 87: ...Memo...