background image

ENGLISH

8

Pre-season Inspection

Is the discharged air cold/warm?

Operation is normal if 15 minutes after the start of
operation, the difference between the air intake
and outlet vents temperature is:

Cooling  :  8°C or above
Heating  : 14°C or above

Are the air intake or outlet vents of the indoor
or outdoor units obstructed?
Are the remote control batteries weak?

If the remote control display appears weak,
replace the batteries.

When the Air Conditioner is Not To Be  Used
for an Extended Period of Time
1

To dry the internal parts of the indoor unit,
operate the unit for 2 ~ 3 hours using:

Operation mode : cooling
Set temperature : 30°C

2

Turn off the power supply and unplug.

3

Remove the remote control batteries.

Recommended Inspection

After used over several seasons, the unit will
become dirty and thus decreases the unit's
performance. Depending on the operation
conditions, a dirty unit may produce odour and
dust may pollute dehumidification system.
Therefore, a seasonal inspection is recommended
in addition to regular cleaning. (Consult an
authorized dealer).

AUTO

Helpful Information

Auto Operation Button

Automatic Operation

If the remote control fails to function or has been
misplaced, press the Auto Operation button to
start the Automatic operation.
The Automatic operation will be activated
immediately once the Auto operation button is
pressed. However, temperature cannot be
adjusted in this operation.
The power indicator on the indoor unit will blink
until the operation mode is selected automatically.
To cancel this operation, press this button once more.

Remote Control Signal Receiving Sound

To switch off the beep (Signal Receiving Sound),
press the Auto Operation button for 10 seconds
continuously or longer.
Repeat the above steps if you want to switch on
the Signal Receiving Sound.

Timer Setting

When power failure occurs, the timer setting will be
cancelled. Once power is resumed, reset the timer.

Thunder and Lightning

This air conditioner is equipped with a built-in
surge protective device. However, in order to
further protect your air conditioner from being
damaged by abnormally strong lightning activity,
you may switch off the main power supply and
unplug from power socket.

Auto  Restart Control

Energy Saving and Operation

Hints

Air Filters

Clean the air filters every 2 weeks.
Dirty filters may reduces cooling or heating
efficiency.

Keep All Doors and Windows Closed

Otherwise, cooling or heating performance will
be reduced and electricity cost is wasted.

Outdoor Unit

Do not block the air outlet vent. Otherwise, it will
lower the cooling or heating performance.

Avoid Direct Sunlight

Keep curtains or drapes closed to avoid direct
sunlight during cooling operation.

Inverter

ON

1 Beep

5 seconds

10 seconds

2 Beep

AUTO

TEST RUN

SOUND

Setting the Temperature

Set the temperature higher or lower than the
desired temperature.

Cooling Operation : 1°C higher

Heating Operation : 2°C lower

Approximately 10% of electricity can be saved.

If  power  is  resumed  after  a  power  failure,  the

operation will restart automatically after 3-4 minutes.

Operation will be restarted automatically under the

previous operation mode and airflow direction when

power is resumed as the operation is not stopped by the

remote control.

Summary of Contents for CS-PE9CKE












Reviews: