ENGLISH
5
NOTES
NOTES
PATROL
,
,
QUIET
,
POWERFUL
• Can be activated in all modes and can be cancelled
by pressing the respective button again.
•
operation can be activated independently.
QUIET
,
POWERFUL
,
,
PATROL
,
• Can not be selected at the same time.
TO SET THE TIMER
TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
OFF
1
2
SET
Select ON or
OFF timer
Set the time
Con
fi
rm
• To cancel ON or OFF timer, press
ON
or
OFF
then
press
CANCEL
.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
SET
.
10˚C
8˚C
6
TO ENJOY CLEAN &
FRESH AIR
PATROL - To monitor air quality
• Detects air quality; e-ion operation activates when air
quality is at dirty level.
• Can be activated even when the unit is turned off.
• Patrol starts automatically with the unit switched on with
OFF/ON
.
7
TO FRESHEN AND PURIFY
THE AIR
• Generates negative ions to produce fresh air effect and
attract dust which will then be captured at the positively
charged e-ion
fi
lters.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing can not be adjusted.
8
TO USE MAINTENANCE
HEATING
+8/10°C HEAT
• Maintain indoor temperature at 8/10°C. Fan switches to
high fan speed automatically.
• This operation overwrite the operation
mode and could be cancelled by pressing
.
• Defrost operation at outdoor unit will
result in sudden cold air from indoor unit.
Eliminate cold air with heat mode.
9
TO ENJOY QUIET
ENVIRONMENT
• This operation reduces air
fl
ow noise.
10
TO ACHIEVE TEMPERATURE
QUICKLY
• This operation will stop automatically after 20 minutes.
11
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
12
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
13
Press to restore the remote control’s default setting.
14
Not used in normal operations.
