73
14.12 +8/15°C Heat Operation
+8/15°C Heat operation provides heating at low setting temperature in unoccupied houses during winter for the
purpose of protecting equipments or housing appliances which may be destroyed by the extreme cold weather.
This operation can be ON by pressing the +8/15
°
C heat button on the remote control.
The temperature settings range are;
o
8.0°C ~ 15.0°C (Pressing TEMP up and TEMP down button at the remote control)
During the operation of this mode;
o
The indoor fan speed will remain at Hi fan tap all the time included deice process.
o
Powerful operation, Quiet operation and Fan Speed selection are disabled.
o
Cold draft prevention control is disabled.
Control
condition;
NOTE:
But after battery reset, (default condition) set temperature always start with 13.0°C.
OFF timer activates
OFF timer activates
OFF timer activates
ON timer activates
(OR)
ON timer
activates
(OR)
ON timer
activates
(OR)
(OR)
(OR)
(OR)
(OR)
(OR)
#1: Summer house set temperature follows previously fixed set temperature (8.0°C ~ 15.0°C).
(Transmit
+8/15°C HEAT)
Go back to
previous LCD
setting &
tranmit code
Go back to
previous LCD
setting &
tranmit code
#1
Go back to
previous LCD
setting &
tranmit code
Go back to
previous LCD
setting &
tranmit code
(Transmit
+8/15°C HEAT)
(Transmit
+8/15°C HEAT)
(Transmit
+8/15°C HEAT)
(Transmit
+8/15°C HEAT)
Temperature range:
8.0°C ~ 15.0°C
Temperature range:
8.0°C ~ 15.0°C
(Transmit
+8/15°C HEAT)
#1
Caution!
If the indoor temperature constantly is less than 0°C (Door, windows not close properly), the error code F11 may
occur. This is because in open area, the indoor sensor will misjudge operation condition and will give error code.
Summary of Contents for CS-HZ25TKE
Page 119: ...119 Figure 8 Figure 9 ...
Page 120: ...120 Figure 10 ...