Panasonic CS-E7PKEW Service Manual Download Page 81

Page: 81 / 208

13.1.5 Automatic

Operation

•

This mode can be set using remote control and the operation is decided by remote control setting temperature,

remote control operation mode and indoor intake air temperature.

•

During operation mode judgment, indoor fan motor (with speed of Lo-) is running for 30 seconds to detect the

indoor intake air temperature.

•

Every 10 minutes, the indoor temperature is judged.

•

For the 1st judgment

If indoor intake temperature - remote control setting temperature

≥

2°C, COOL mode is decided.

-2°C

≤

indoor intake temperature - remote control setting temperature < 2°C, DRY mode is decided.

If indoor intake temperature - remote control setting temperature < -2°C, HEAT mode is decided.

•

For the 2nd judgment onwards

If indoor intake temperature - remote control setting temperature

≥

3°C, if previous operate in DRY mode,

then continue in DRY mode. otherwise COOL mode is decided.

-2°C

≤

indoor intake temperature - remote control setting temperature < 3°C, maintain with previous mode.

If indoor intake temperature - remote control setting temperature < -2°C, HEAT mode is decided.

13.2 Indoor Fan Motor Operation

13.2.1 Basic Rotation Speed (rpm)

A. Basic Rotation Speed (rpm)

i. Manual Fan Speed
[Cooling, Dry]

•

Fan motor’s number of rotation is determined according to remote control setting.

Remote control

○

Tab Hi

Me+

Me-

[Heating]

•

Fan motor’s number of rotation is determined according to remote control setting.

Remote control

○

Tab SHi

Me+

Me-

ii Auto Fan Speed
[Cooling, Dry]

•

According to room temperature and setting temperature, indoor fan speed is determined automatically.

•

When set temperature is not achieved, the indoor fan will operate according to pattern below.

•

When set temperature achieved, the indoor fan speed will be fixed. When thermostat off, the fan stop periodically.

Summary of Contents for CS-E7PKEW

















































































































































































































Search results

Summary of Contents for CS-E7PKEW

Reviews:

Panasonic CS-E7PKEW, Service Manual, Page: 81 / 208

Search results

Summary of Contents for CS-E7PKEW

Reviews: