Panasonic CS-E7NKDW Service Manual Download Page 59

Page: 59 / 145

ECONAVI and AUTO COMFORT Demo Mode

To enable ECO DEMO mode, during unit is OFF (power standby):

To disable ECO Demo MODE:

Transmit ECO Demo signal again.

Control details:

During ECONAVI and AUTO COMFORT Demo mode, operation LED ON and horizontal vane will set to Auto

Swing.

When Hi activity judge, Fan speed change to Hi Fan and ECONAVI and AUTO COMFORT LED ON.

When Lo activity judge, Fan speed change to Lo Fan and ECONAVI and AUTO COMFORT LED OFF.

No setting temperature adjustment.

During ECONAVI and AUTO COMFORT operation, the internal setting temperature and fan speed are adjusted

in order to provide comfort and energy saving.

ECONAVI Start condition.

Press ECONAVI button.

ECONAVI Stop condition.

Press ECONAVI button again.

OFF Timer activates.

Press OFF/ON button to turn off the air conditioner.

Press AUTO OFF/ON button to turn off the air conditioner.

Press POWERFUL/QUIET button.

AUTO COMFORT Start condition.

Press AUTO COMFORT button.

AUTO COMFORT Stop condition.

Press AUTO COMFORT button again.

OFF Timer activates.

Press OFF/ON button to turn off the air conditioner.

Press AUTO OFF/ON button to turn off the air conditioner.

Press POWERFUL/QUIET button.

Summary of Contents for CS-E7NKDW


















































































































































Search results

Summary of Contents for CS-E7NKDW

Reviews:

Brands by name

Popular brands

Panasonic CS-E7NKDW, Service Manual

Search results

Summary of Contents for CS-E7NKDW

Reviews:

Brands by name

Popular brands