background image

3

 

CAUTION

CAUTION

INDOOR UNIT AND OUTDOOR UNIT

Do not wash the indoor unit with water, benzene, 

thinner or scouring powder to avoid damage or 

corrosion at the unit.
Do not use for preservation of precise equipment, 

food, animals, plants, artwork or other objects. This 

may cause quality deterioration, etc.
Do not use any combustible equipment in front of 

the air

fl

 ow outlet to avoid 

fi

 re propagation.

Do not expose plants or pet directly to air

fl

 ow to 

avoid injury, etc.
Do not touch the sharp aluminium 

fi

 n, 

sharp parts may cause injury.

Do not switch ON the indoor unit when waxing the 

fl

 oor. After waxing, aerate the room properly before 

operating the unit.
Do not install the unit in oily and smoky areas to 

prevent damage to the unit.
Do not dismantle the unit for cleaning purpose to 

avoid injury.
Do not step onto an unstable bench when cleaning 

the unit to avoid injury.
Do not place a vase or water container on the 

unit. Water may enter the unit and degrade the 

insulation. This may cause an electric shock.
Do not open window or door for long time during

COOL/DRY mode operation.
Ensure drainage pipe is connected properly and 

keep drainage outlet clear of gutters, containers 

or does not immersed in water to prevent water 

leakage.
After a long period of use or use with any 

combustible equipment, aerate the room regularly.
After a long period of use, make sure the 

installation rack does not deteriorate to prevent the 

unit from falling down.

REMOTE CONTROL

Do not use rechargeable (Ni-Cd) batteries.

It may damage the remote control.

To prevent malfunction or damage of the remote 

control:

•  Remove the batteries if the unit is not going to be 

used for a long period of time. 

•  New batteries of the same type must be inserted 

following the polarity stated. 

 

WARNING

WARNING

REMOTE CONTROL

Do not allow infants and small children to play 

with the remote control to prevent them from 

accidentally swallowing the batteries.

POWER SUPPLY

Do not use a modi

fi

 ed cord, 

joint cord, extension cord or 

unspeci

fi

 ed cord to prevent 

overheating and 

fi

 re. 

To prevent overheating, 

fi

 re or electric shock:

•  Do not share the same power outlet with other 

equipment.

•  Do not operate with wet hands.

•  Do not over bend the power supply cord.
If the supply cord is damage, it must be replaced 

by the manufacturer, its service agent or similarly 

quali

fi

 ed persons in order to avoid a hazard.

It is strongly recommended to install this unit 

using an Earth Leakage Circuit Breaker (ELCB) 

or Ground Fault Interrupt (GFCI) or Appliance 

Leakage Current Interrupt (ALCI) to prevent electric 

shock or 

fi

 re.

Stop using the product if any abnormality/failure 

occurs or turn off the power switch and breaker.

(Risk of smoke/

fi

 re/electric shock)

Examples of abnormality/failure

•  The ELCB or GFCI or ALCI trip frequently.  

•  Burning smell is observed.

•  Abnormal noise or vibration of the unit is 

observed.

•  Water leaks from the indoor unit. 

•  Power cord becomes abnormally hot.

•  Fan speed cannot be controlled.

•  The unit stops running immediately even if it is 

switched on for operation.

•  The fan does not stop even if the operation is 

stopped.

Contact your local dealer immediately for 

maintenance or repair assistance.
This equipment must be earthed to prevent 

electrical shock or 

fi

 re.

Prevent electric shock by switching off the power:

- Before cleaning or servicing.

- Extended non-use.

- Abnormally strong lightning activity.

Summary of Contents for CS-E18NKUA













Reviews: